CAD SchemCAD
USB-C PDAnalogixSMD (см. даташит / корпус на плате)

ANX7447QN — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Analogix USB-C PD & DisplayPort Alt-Mode Switch Controller

Manufacturer
Analogix
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
3.3V / 1.0V
Output / Architecture
USB-C PD & DisplayPort Alt-Mode Mux
SMD Top Marking
ANX7447QN

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (ANX7447QN)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact ANX7447QN suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using ANX7447QN

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLENOVO flex 5cb 13IML05 BM5986 REV1.3—Schematic Page #37Open Schematic →

Technical Repair FAQ — ANX7447QN

What is ANX7447QN used for on a laptop motherboard?
ANX7447QN by Analogix is a USB-C PD integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V / 1.0V; output/spec: USB-C PD & DisplayPort Alt-Mode Mux). Analogix USB-C PD & DisplayPort Alt-Mode Switch Controller
What is the SMD marking code for ANX7447QN?
ANX7447QN is top-marked directly with its part identifier (ANX7447QN) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of ANX7447QN?
Verify main supply rail (3.3V / 1.0V), output impedance on USB-C PD & DisplayPort Alt-Mode Mux, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use ANX7447QN (donor boards)?
Confirmed laptop donor motherboards using ANX7447QN include: Lenovo LENOVO flex 5cb 13IML05 BM5986 REV1.3. Search SchemCAD for additional board revisions.