CAD SchemCAD
EC/KBC ControllersITE TechSMD (см. даташит / корпус на плате)

IT8892JX — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)

Manufacturer
ITE Tech
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
3.3V (+3VALW / VSTBY), 1.8V (eSPI)
Output / Architecture
Laptop Embedded Controller (EC / KBC)
SMD Top Marking
IT8892JX

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (IT8892JX)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact IT8892JX suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using IT8892JX

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
GigabyteGIGABYTE GA-H110M-S2PV Rev 1.0—Schematic Page #22Open Schematic →
GigabyteGigabyte GA-B150M-D3V REV1.0—Schematic Page #23Open Schematic →
GigabyteGigabyte GA-B250M-D2VX-SI Rev1.0—Schematic Page #11Open Schematic →
GigabyteGigabyte GA-B250M-Wind Rev1.0—Schematic Page #11Open Schematic →

Technical Repair FAQ — IT8892JX

What is IT8892JX used for on a laptop motherboard?
IT8892JX by ITE Tech is a EC/KBC Controllers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V (+3VALW / VSTBY), 1.8V (eSPI); output/spec: Laptop Embedded Controller (EC / KBC)). ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)
What is the SMD marking code for IT8892JX?
IT8892JX is top-marked directly with its part identifier (IT8892JX) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of IT8892JX?
Verify main supply rail (3.3V (+3VALW / VSTBY), 1.8V (eSPI)), output impedance on Laptop Embedded Controller (EC / KBC), and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use IT8892JX (donor boards)?
Confirmed laptop donor motherboards using IT8892JX include: Gigabyte GIGABYTE GA-H110M-S2PV Rev 1.0, Gigabyte Gigabyte GA-B150M-D3V REV1.0, Gigabyte Gigabyte GA-B250M-D2VX-SI Rev1.0, Gigabyte Gigabyte GA-B250M-Wind Rev1.0. Search SchemCAD for additional board revisions.