CAD SchemCAD
EC/KBC ControllersITE TechSMD (см. даташит / корпус на плате)

IT8991 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)

Manufacturer
ITE Tech
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
3.3V (+3VALW / VSTBY), 1.8V (eSPI)
Output / Architecture
Laptop Embedded Controller (EC / KBC)
SMD Top Marking
IT8991

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (IT8991)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact IT8991 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using IT8991

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
ClevoClevo P650HP6 -G P651HP6 -G P650H P63MB 6-71-P65P0-D02A P65XHP6 SM 201612276-71-P65P0Schematic Page #49Open Schematic →
AcerAcer Aspire Switch Alpha 12 SA5-271 Pegatron P2JCC HAWAII Rev 0.0—Schematic Page #21Open Schematic →
ClevoClevo P650RS-G P651RS-G 6-7P-P65 SB-005 6-71-P65S0-D02A6-71-P65S0Schematic Page #44Open Schematic →

Technical Repair FAQ — IT8991

What is IT8991 used for on a laptop motherboard?
IT8991 by ITE Tech is a EC/KBC Controllers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V (+3VALW / VSTBY), 1.8V (eSPI); output/spec: Laptop Embedded Controller (EC / KBC)). ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)
What is the SMD marking code for IT8991?
IT8991 is top-marked directly with its part identifier (IT8991) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of IT8991?
Verify main supply rail (3.3V (+3VALW / VSTBY), 1.8V (eSPI)), output impedance on Laptop Embedded Controller (EC / KBC), and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use IT8991 (donor boards)?
Confirmed laptop donor motherboards using IT8991 include: Clevo Clevo P650HP6 -G P651HP6 -G P650H P63MB 6-71-P65P0-D02A P65XHP6 SM 20161227 (6-71-P65P0), Acer Acer Aspire Switch Alpha 12 SA5-271 Pegatron P2JCC HAWAII Rev 0.0, Clevo Clevo P650RS-G P651RS-G 6-7P-P65 SB-005 6-71-P65S0-D02A (6-71-P65S0). Search SchemCAD for additional board revisions.