CAD SchemCAD
3.3V/5V Buck PWMMonolithic Power Systems (MPS)QFN-40 / QFN-48

MP2940AGRT-0010 — Datasheet PDF, Startup Pinout (VCC, VR_ON, VDIO/VCLK/ALERT#, PWM1/PWM2/PWM3), SMD Code, Equivalents & Donor Boards

MPS Digital Multi-Phase IMVP9 SVID Controller (WARNING: contains board-specific MTP firmware — source donor from identical board model!)

Manufacturer
Monolithic Power Systems (MPS)
Subsystem Category
Package / Case
QFN-40 / QFN-48
Input Voltage (VIN / VCC)
3.3V / 5V
Output / Architecture
IMVP9 Digital Multi-Phase CPU Controller
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — MP2940AGRT-0010

Pin # Signal Name Role Voltage / Diagnostic Description
VCC/VDDVCCpower_in+5V controller logic supply
VR_ONVR_ONcontrolVcore enable input from EC/PCH
SVIDVDIO/VCLK/ALERT#busesIntel SVID 3-wire serial VID bus (DATA, CLK, ALERT#)
PWM1..NPWM1/PWM2/PWM3outputsTri-state PWM outputs to DrMOS stages / gate drivers
VR_READYVR_HOT#/PGOODoutputsVcore Power-Good (VR_READY) & thermal throttle VR_HOT#

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using MP2940AGRT-0010

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellXPS 13 7390 LA-G172P DDP31 r1.0 A00LA-G172PSchematic Page #91Open Schematic →

Technical Repair FAQ — MP2940AGRT-0010

What is MP2940AGRT-0010 used for on a laptop motherboard?
MP2940AGRT-0010 by Monolithic Power Systems (MPS) is a 3.3V/5V Buck PWM integrated circuit in a QFN-40 / QFN-48 package (input voltage 3.3V / 5V; output/spec: IMVP9 Digital Multi-Phase CPU Controller). MPS Digital Multi-Phase IMVP9 SVID Controller (WARNING: contains board-specific MTP firmware — source donor from identical board model!)
What is the SMD marking code for MP2940AGRT-0010?
The top silkscreen SMD marking code for MP2940AGRT-0010 is MP2940A, 2940A (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Донор MP2940A с идентичной платформы (прошивка конфигурации в MTP!).
What are the key diagnostic pins / startup conditions of MP2940AGRT-0010?
Key multimeter diagnostic pin measurements for MP2940AGRT-0010: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use MP2940AGRT-0010 (donor boards)?
Confirmed laptop donor motherboards using MP2940AGRT-0010 include: Dell XPS 13 7390 LA-G172P DDP31 r1.0 A00 (LA-G172P). Search SchemCAD for additional board revisions.