CAD SchemCAD
Power MOSFETs & DrMOSVishay SiliconixPowerPAK MLP55-39L (5x5mm)

SIC654CD-T1-GE3 — Datasheet PDF, Startup Pinout (VIN, VCC/PVCC, PWM, EN/FCCM), SMD Code, Equivalents & Donor Boards

Vishay 50A Smart Power Stage with Current & Temperature Monitors in MLP55-39L

Manufacturer
Vishay Siliconix
Subsystem Category
Package / Case
PowerPAK MLP55-39L (5x5mm)
Input Voltage (VIN / VCC)
4.5V – 21V
Output / Architecture
50A Smart Power Stage (IMON + TMON)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — SIC654CD-T1-GE3

Pin # Signal Name Role Voltage / Diagnostic Description
VINVINpower_inHigh-voltage input from B+ (CRITICAL: check VIN-to-SW short before powering!)
VCC/PVCCVCC/PVCCpower_in+5V internal gate driver supply
PWMPWMcontrolTri-state PWM input from multiphase controller (Hi-Z = Hi/Lo FETs off)
EN/DISB#EN/FCCMcontrolDriver enable / CCM mode control
BOOTBOOToutputsBootstrap capacitor pin to SW
SWSW/VSWHoutputsPhase switch node to CPU/GPU inductor (low ohm 0.3–15Ω on modern GPU/CPU is NORMAL)

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using SIC654CD-T1-GE3

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
ASRockASRock H470M-ITX-ac70-MXBCL0-A01—Open Schematic →
ASRockASRock Z590 PRO4 r1.03 70-MXBEJ0-A2270-MXBEJ0-A22—Open Schematic →
ASRockASROCK RX6650XT SL 8GO S 16-18 1.01——Open Schematic →

Technical Repair FAQ — SIC654CD-T1-GE3

What is SIC654CD-T1-GE3 used for on a laptop motherboard?
SIC654CD-T1-GE3 by Vishay Siliconix is a Power MOSFETs & DrMOS integrated circuit in a PowerPAK MLP55-39L (5x5mm) package (input voltage 4.5V – 21V; output/spec: 50A Smart Power Stage (IMON + TMON)). Vishay 50A Smart Power Stage with Current & Temperature Monitors in MLP55-39L
What is the SMD marking code for SIC654CD-T1-GE3?
The top silkscreen SMD marking code for SIC654CD-T1-GE3 is SIC654, 654CD (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: NCP303150.
What are the key diagnostic pins / startup conditions of SIC654CD-T1-GE3?
Key multimeter diagnostic pin measurements for SIC654CD-T1-GE3: Pin VIN (VIN): High-voltage input from B+ (CRITICAL: check VIN-to-SW short before powering!); Pin VCC/PVCC (VCC/PVCC): +5V internal gate driver supply; Pin PWM (PWM): Tri-state PWM input from multiphase controller (Hi-Z = Hi/Lo FETs off); Pin EN/DISB# (EN/FCCM): Driver enable / CCM mode control; Pin BOOT (BOOT): Bootstrap capacitor pin to SW.
Which laptop motherboards use SIC654CD-T1-GE3 (donor boards)?
Confirmed laptop donor motherboards using SIC654CD-T1-GE3 include: ASRock ASRock H470M-ITX-ac (70-MXBCL0-A01), ASRock ASRock Z590 PRO4 r1.03 70-MXBEJ0-A22 (70-MXBEJ0-A22), ASRock ASROCK RX6650XT SL 8GO S 16-18 1.01. Search SchemCAD for additional board revisions.