CAD SchemCAD
USB-C PDTexas InstrumentsSMD

SN1703018 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Component SN1703018 (discovered from schematic; verify pinout against board netlist)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD
Input Voltage (VIN / VCC)
См. схему / даташит
Output / Architecture
Интегральная микросхема ноутбука
SMD Top Marking
SN1703018

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (SN1703018)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact SN1703018 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using SN1703018

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellLA-F551P LA-F552P LA-F553P Rev 1.0 A00 Dell Alienware 17 R5 DDR51LA-F551PSchematic Page #58Open Schematic →

Technical Repair FAQ — SN1703018

What is SN1703018 used for on a laptop motherboard?
SN1703018 by Texas Instruments is a USB-C PD integrated circuit in a SMD package (input voltage См. схему / даташит; output/spec: Интегральная микросхема ноутбука). Component SN1703018 (discovered from schematic; verify pinout against board netlist)
What is the SMD marking code for SN1703018?
SN1703018 is top-marked directly with its part identifier (SN1703018) on the SMD package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of SN1703018?
Verify main supply rail (См. схему / даташит), output impedance on Интегральная микросхема ноутбука, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use SN1703018 (donor boards)?
Confirmed laptop donor motherboards using SN1703018 include: Dell LA-F551P LA-F552P LA-F553P Rev 1.0 A00 Dell Alienware 17 R5 DDR51 (LA-F551P). Search SchemCAD for additional board revisions.