CAD SchemCAD
USB-C PDTexas InstrumentsSMD (см. даташит / корпус на плате)OFFICIAL PDF

TUSB212 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Texas Instruments USB Type-C Power Delivery / DisplayPort Alt-Mode Controller

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
3.3V / 5V – 20V
Output / Architecture
USB Type-C PD / Alt-Mode Port Controller
SMD Top Marking
TUSB212

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (TUSB212)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact TUSB212 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using TUSB212

Search SchemCAD interactive schematics and BoardViews to locate TUSB212 across 39,000+ indexed laptop motherboards.

🔎 TUSB212 →

Technical Repair FAQ — TUSB212

What is TUSB212 used for on a laptop motherboard?
TUSB212 by Texas Instruments is a USB-C PD integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V / 5V – 20V; output/spec: USB Type-C PD / Alt-Mode Port Controller). Texas Instruments USB Type-C Power Delivery / DisplayPort Alt-Mode Controller
What is the SMD marking code for TUSB212?
TUSB212 is top-marked directly with its part identifier (TUSB212) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of TUSB212?
Verify main supply rail (3.3V / 5V – 20V), output impedance on USB Type-C PD / Alt-Mode Port Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use TUSB212 (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate TUSB212 across 39,000+ laptop schematics and BoardView layouts.