CAD SchemCAD
Power MOSFETs & DrMOSonsemi / Nexperia / VishaySOT-23-3OFFICIAL PDF

2N7002LT1G — Datasheet PDF, Startup Pinout (Gate (G), Source (S), Drain (D)), SMD Code, Equivalents & Donor Boards

Most common 60V N-Channel Signal MOSFET on laptop boards (top mark 702 / K72): level-shifts ACOK, drives DC-IN P-FET dividers, and gates enables

Manufacturer
onsemi / Nexperia / Vishay
Subsystem Category
Package / Case
SOT-23-3
Input Voltage (VIN / VCC)
60V Vds, 300mA
Output / Architecture
N-Channel 60V Logic-Level Signal MOSFET
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — 2N7002LT1G

Pin # Signal Name Role Voltage / Diagnostic Description
1Gate (G)controlGate (>2.5V pulls Drain to Source/GND)
2Source (S)gndSource (typically GND)
3Drain (D)outputsDrain output

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using 2N7002LT1G

Search SchemCAD interactive schematics and BoardViews to locate 2N7002LT1G across 39,000+ indexed laptop motherboards.

🔎 2N7002LT1G →

Technical Repair FAQ — 2N7002LT1G

What is 2N7002LT1G used for on a laptop motherboard?
2N7002LT1G by onsemi / Nexperia / Vishay is a Power MOSFETs & DrMOS integrated circuit in a SOT-23-3 package (input voltage 60V Vds, 300mA; output/spec: N-Channel 60V Logic-Level Signal MOSFET). Most common 60V N-Channel Signal MOSFET on laptop boards (top mark 702 / K72): level-shifts ACOK, drives DC-IN P-FET dividers, and gates enables
What is the SMD marking code for 2N7002LT1G?
The top silkscreen SMD marking code for 2N7002LT1G is 702, K72, 7002, 12W, S72 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: BSS138, 2N7002K.
What are the key diagnostic pins / startup conditions of 2N7002LT1G?
Key multimeter diagnostic pin measurements for 2N7002LT1G: Pin 1 (Gate (G)): Gate (>2.5V pulls Drain to Source/GND); Pin 2 (Source (S)): Source (typically GND); Pin 3 (Drain (D)): Drain output.
Which laptop motherboards use 2N7002LT1G (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate 2N7002LT1G across 39,000+ laptop schematics and BoardView layouts.