CAD SchemCAD
MOSFET Công Suất & DrMOSAlpha & Omega SemiconductorSMD (см. даташит / корпус на плате)

AON7442 — Datasheet PDF, Sơ đồ chân, Mã lưng SMD, IC Tương đương & Main xác

Alpha & Omega Power MOSFET for DC-IN isolation or buck switching (verify N-channel vs P-channel polarity!)

Hãng sản xuất
Alpha & Omega Semiconductor
Phân loại khối
Kiểu chân (Package)
SMD (см. даташит / корпус на плате)
Điện áp vào (VIN / VCC)
20V – 30V Vds
Ngõ ra / Cấu trúc
Power Trench MOSFET (Check N-Ch vs P-Ch!)
Mã lưng SMD
AON7442

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD

In trực tiếp tên mã linh kiện (AON7442)

IC Tương Đương Thay Thế Chân-Đổi-Chân

Chưa có mã tương đương phổ thông — nên thay đúng mã AON7442.

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa AON7442

Hãng Dòng Máy / Tên Main Mã Main Trang Sơ Đồ Thao Tác
OEMQUANTA H97M DAH97MMBAC0DAH97MMBAC0Schematic Page #31Mở Sơ Đồ →

Câu Hỏi Kỹ Thuật Thường Gặp — AON7442

What is AON7442 used for on a laptop motherboard?
AON7442 by Alpha & Omega Semiconductor is a MOSFET Công Suất & DrMOS integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 20V – 30V Vds; output/spec: Power Trench MOSFET (Check N-Ch vs P-Ch!)). Alpha & Omega Power MOSFET for DC-IN isolation or buck switching (verify N-channel vs P-channel polarity!)
What is the SMD marking code for AON7442?
AON7442 is top-marked directly with its part identifier (AON7442) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of AON7442?
Verify main supply rail (20V – 30V Vds), output impedance on Power Trench MOSFET (Check N-Ch vs P-Ch!), and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use AON7442 (donor boards)?
Confirmed laptop donor motherboards using AON7442 include: OEM QUANTA H97M DAH97MMBAC0 (DAH97MMBAC0). Search SchemCAD for additional board revisions.