CAD SchemCAD
IC Âm thanh, LAN, LDO & Ngoại viAnpecSOT-23-5 / SOP-8

APL3512ABI-TRG — Datasheet PDF, Sơ đồ chân (VIN, EN, VOUT), Mã lưng SMD, IC Tương đương & Main xác

Anpec 2A Current-Limited Power Switch (A = active-HIGH EN, B = active-LOW EN#)

Hãng sản xuất
Anpec
Kiểu chân (Package)
SOT-23-5 / SOP-8
Điện áp vào (VIN / VCC)
2.7V – 5.5V
Ngõ ra / Cấu trúc
2A USB / LCDVDD Power Switch
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — APL3512ABI-TRG

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
INVINpower_inSupply input
ENENcontrolEnable input
OUTVOUToutputsSwitched output

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa APL3512ABI-TRG

Tìm kiếm vị trí APL3512ABI-TRG trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 APL3512ABI-TRG →

Câu Hỏi Kỹ Thuật Thường Gặp — APL3512ABI-TRG

What is APL3512ABI-TRG used for on a laptop motherboard?
APL3512ABI-TRG by Anpec is a IC Âm thanh, LAN, LDO & Ngoại vi integrated circuit in a SOT-23-5 / SOP-8 package (input voltage 2.7V – 5.5V; output/spec: 2A USB / LCDVDD Power Switch). Anpec 2A Current-Limited Power Switch (A = active-HIGH EN, B = active-LOW EN#)
What is the SMD marking code for APL3512ABI-TRG?
The top silkscreen SMD marking code for APL3512ABI-TRG is 3512A, L3512 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: G5243A / SY6288C (для версии A).
What are the key diagnostic pins / startup conditions of APL3512ABI-TRG?
Key multimeter diagnostic pin measurements for APL3512ABI-TRG: Pin IN (VIN): Supply input; Pin EN (EN): Enable input; Pin OUT (VOUT): Switched output.
Which laptop motherboards use APL3512ABI-TRG (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate APL3512ABI-TRG across 39,000+ laptop schematics and BoardView layouts.