CAD SchemCAD
电池充电管理芯片 (Battery Chargers)Texas InstrumentsSMD (см. даташит / корпус на плате)OFFICIAL PDF

BQ24190 — 官方 PDF 数据手册、关键引脚电压、丝印反查与笔记本料板

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

芯片厂商
Texas Instruments
封装形式
SMD (см. даташит / корпус на плате)
输入电压 (VIN / VCC)
4.5V – 24V
输出规格 / 架构
1–4S Li-Ion Battery Charge Controller
顶部 SMD 丝印
BQ24190

SMD 丝印代码与兼容代换型号 (Equivalents)

芯片顶部丝印代码 (Top Marking)

表面直接印有完整或简写型号 (BQ24190)

原位兼容代换型号 (Pin-to-Pin)

暂无通用无差别代换型号,建议使用原型号 BQ24190 并核对图纸。

代换焊接前请务必核对 QFN/SOIC 封装脚数、LDO 线性输出顺序及 ACOK / EN 信号极性。

使用 BQ24190 的笔记本料板型号表 (Donor Motherboards)

在 SchemCAD 的 39,000+ 份笔记本点位图与电路图中搜索 BQ24190。

🔎 BQ24190 →

芯片级维修常见问题 (FAQ) — BQ24190

What is BQ24190 used for on a laptop motherboard?
BQ24190 by Texas Instruments is a 电池充电管理芯片 (Battery Chargers) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24190?
BQ24190 is top-marked directly with its part identifier (BQ24190) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24190?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24190 (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ24190 across 39,000+ laptop schematics and BoardView layouts.