What is EN25F40 used for on a laptop motherboard?
EN25F40 by EON / EliteMT is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 4Mbit (512KB) 3.3V SPI NOR BIOS/EC Flash). 4Mbit (512KB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for EN25F40?
EN25F40 is top-marked directly with its part identifier (EN25F40) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of EN25F40?
Key multimeter diagnostic pin measurements for EN25F40: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use EN25F40 (donor boards)?
Confirmed laptop donor motherboards using EN25F40 include: Acer Acer Aspire One DA0ZE6MB6E0 QUANTA ZE6-REV1B (DA0ZE6MB6E0), HP HP DA0LX3MB8F0 QUANTA LX3 (DA0LX3MB8F0), Toshiba L735-14H DABU5MB28A0 Rev A Toshiba Satellite L745 (DABU5MB28A0), OEM L50-B-12G - QUANTA BLBD 1 - DABLIDMB8E0 REV E (DABLIDMB8E0), HP HP mini 210-4033TU Quanta NM3 DA0NM3MB6E0 DA0NM3MB6E1 (DA0NM3MB6E0). Search SchemCAD for additional board revisions.