CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)SPI Flash VendorSOIC-8 / WSON-8OFFICIAL PDF

IS25LP064D — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

SPI NOR 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing

Manufacturer
SPI Flash Vendor
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
SPI NOR 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
IS25LP064D

Multimeter Diagnostic & Startup Pinout Table — IS25LP064D

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (IS25LP064D)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact IS25LP064D suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using IS25LP064D

Search SchemCAD interactive schematics and BoardViews to locate IS25LP064D across 39,000+ indexed laptop motherboards.

🔎 IS25LP064D →

Technical Repair FAQ — IS25LP064D

What is IS25LP064D used for on a laptop motherboard?
IS25LP064D by SPI Flash Vendor is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: SPI NOR 3.3V SPI NOR BIOS/EC Flash). SPI NOR 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for IS25LP064D?
IS25LP064D is top-marked directly with its part identifier (IS25LP064D) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of IS25LP064D?
Key multimeter diagnostic pin measurements for IS25LP064D: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use IS25LP064D (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate IS25LP064D across 39,000+ laptop schematics and BoardView layouts.