CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)EON / EliteMTSOIC-8 / WSON-8

EN25Q32A — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

32Mbit (4MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing

Manufacturer
EON / EliteMT
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
32Mbit (4MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
EN25Q32A

Multimeter Diagnostic & Startup Pinout Table — EN25Q32A

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (EN25Q32A)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact EN25Q32A suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using EN25Q32A

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
MSIMSI MS-16G9 0B 1107 BOMMS-16G9Schematic Page #17Open Schematic →
MSIMSI MS-16G9 MS-1754 0A 17541-0A17541-0ASchematic Page #17Open Schematic →
MSIMSI MS-17541-10MS-1754Schematic Page #17Open Schematic →

Technical Repair FAQ — EN25Q32A

What is EN25Q32A used for on a laptop motherboard?
EN25Q32A by EON / EliteMT is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 32Mbit (4MB) 3.3V SPI NOR BIOS/EC Flash). 32Mbit (4MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for EN25Q32A?
EN25Q32A is top-marked directly with its part identifier (EN25Q32A) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of EN25Q32A?
Key multimeter diagnostic pin measurements for EN25Q32A: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use EN25Q32A (donor boards)?
Confirmed laptop donor motherboards using EN25Q32A include: MSI MSI MS-16G9 0B 1107 BOM (MS-16G9), MSI MSI MS-16G9 MS-1754 0A 17541-0A (17541-0A), MSI MSI MS-17541-10 (MS-1754). Search SchemCAD for additional board revisions.