CAD SchemCAD
声卡、网卡、LDO 与外围管理芯片GMTMSOP-8 / SOP-8

G547E2P81U — 官方 PDF 数据手册、关键引脚电压 (IN, EN, OUT, OC#)、丝印反查与笔记本料板

2A USB High-Side Switch in MSOP-8/SOP-8 (if OC# pulls low due to blown chip, BIOS halts with 'USB Over Current Detected'!)

芯片厂商
GMT
封装形式
MSOP-8 / SOP-8
输入电压 (VIN / VCC)
2.7V – 5.5V
输出规格 / 架构
2A USB Power Switch with OC# Flag
顶部 SMD 丝印

万用表检修关键引脚与开启条件表 — G547E2P81U

引脚 # 信号名称 功能角色 正常电压参考 / 万用表检修说明
2,3INpower_in+5VALW input
4ENcontrolUSB enable from EC
6,7,8OUToutputs+5V USB port output
5OC#outputsActive-LOW Over-Current flag to PCH

SMD 丝印代码与兼容代换型号 (Equivalents)

芯片顶部丝印代码 (Top Marking)
原位兼容代换型号 (Pin-to-Pin)

代换焊接前请务必核对 QFN/SOIC 封装脚数、LDO 线性输出顺序及 ACOK / EN 信号极性。

使用 G547E2P81U 的笔记本料板型号表 (Donor Motherboards)

在 SchemCAD 的 39,000+ 份笔记本点位图与电路图中搜索 G547E2P81U。

🔎 G547E2P81U →

芯片级维修常见问题 (FAQ) — G547E2P81U

What is G547E2P81U used for on a laptop motherboard?
G547E2P81U by GMT is a 声卡、网卡、LDO 与外围管理芯片 integrated circuit in a MSOP-8 / SOP-8 package (input voltage 2.7V – 5.5V; output/spec: 2A USB Power Switch with OC# Flag). 2A USB High-Side Switch in MSOP-8/SOP-8 (if OC# pulls low due to blown chip, BIOS halts with 'USB Over Current Detected'!)
What is the SMD marking code for G547E2P81U?
The top silkscreen SMD marking code for G547E2P81U is 547E, 547F, G547 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: SY6288CCAC.
What are the key diagnostic pins / startup conditions of G547E2P81U?
Key multimeter diagnostic pin measurements for G547E2P81U: Pin 2,3 (IN): +5VALW input; Pin 4 (EN): USB enable from EC; Pin 6,7,8 (OUT): +5V USB port output; Pin 5 (OC#): Active-LOW Over-Current flag to PCH.
Which laptop motherboards use G547E2P81U (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate G547E2P81U across 39,000+ laptop schematics and BoardView layouts.