CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8

GD25D10C — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

1Mbit (128KB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (GigaDevice, GD25B/Q series = 3.3V). Preserve QE bit when flashing

Manufacturer
GigaDevice
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V Standard)
Output / Architecture
1Mbit (128KB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
GD25D10C

Multimeter Diagnostic & Startup Pinout Table — GD25D10C

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (GD25D10C)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact GD25D10C suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using GD25D10C

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
ASRockASRock A520M Pro470-MXBDU0-A01—Open Schematic →
ASRockASRock Z590 PRO4 r1.03 70-MXBEJ0-A2270-MXBEJ0-A22—Open Schematic →
ASRockAsRock B660M PRO RS r1.0270-MXBGW0-A01—Open Schematic →

Technical Repair FAQ — GD25D10C

What is GD25D10C used for on a laptop motherboard?
GD25D10C by GigaDevice is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: 1Mbit (128KB) 3.3V SPI NOR BIOS/EC Flash). 1Mbit (128KB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (GigaDevice, GD25B/Q series = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for GD25D10C?
GD25D10C is top-marked directly with its part identifier (GD25D10C) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25D10C?
Key multimeter diagnostic pin measurements for GD25D10C: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use GD25D10C (donor boards)?
Confirmed laptop donor motherboards using GD25D10C include: ASRock ASRock A520M Pro4 (70-MXBDU0-A01), ASRock ASRock Z590 PRO4 r1.03 70-MXBEJ0-A22 (70-MXBEJ0-A22), ASRock AsRock B660M PRO RS r1.02 (70-MXBGW0-A01). Search SchemCAD for additional board revisions.