CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)GigaDeviceSOIC-8 / WSON-8

GD25R256EYIGR — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

256Mbit (32MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (GigaDevice, GD25B/Q series = 3.3V). Preserve QE bit when flashing

Manufacturer
GigaDevice
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V Standard)
Output / Architecture
256Mbit (32MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
GD25R256EYIGR

Multimeter Diagnostic & Startup Pinout Table — GD25R256EYIGR

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (GD25R256EYIGR)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact GD25R256EYIGR suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using GD25R256EYIGR

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
ASUSTUF2022 FX507ZM——Open Schematic →

Technical Repair FAQ — GD25R256EYIGR

What is GD25R256EYIGR used for on a laptop motherboard?
GD25R256EYIGR by GigaDevice is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: 256Mbit (32MB) 3.3V SPI NOR BIOS/EC Flash). 256Mbit (32MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (GigaDevice, GD25B/Q series = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for GD25R256EYIGR?
GD25R256EYIGR is top-marked directly with its part identifier (GD25R256EYIGR) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of GD25R256EYIGR?
Key multimeter diagnostic pin measurements for GD25R256EYIGR: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use GD25R256EYIGR (donor boards)?
Confirmed laptop donor motherboards using GD25R256EYIGR include: ASUS TUF2022 FX507ZM. Search SchemCAD for additional board revisions.