CAD SchemCAD
EC/KBC ControllersITE TechVFBGA / LQFP

IT81202E — Datasheet PDF, Startup Pinout (VSTBY (+3VALW), AVCC, WRST#, ESPI_IO0..3 / CLK / CS# / RST#), SMD Code, Equivalents & Donor Boards

Next-gen 32-bit RISC-V eSPI Embedded Controller in recent Lenovo/Asus laptops

Manufacturer
ITE Tech
Subsystem Category
Package / Case
VFBGA / LQFP
Input Voltage (VIN / VCC)
3.3V / 1.8V
Output / Architecture
RISC-V eSPI Embedded Controller
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — IT81202E

Pin # Signal Name Role Voltage / Diagnostic Description
VSTBYVSTBY (+3VALW)power_inStandby +3.3VALW supply (NOTE: eSPI/FSPI I/O rail is often 1.8V!)
AVCCAVCCpower_inAnalog ADC reference supply
14WRST#controlEC Reset pin (valid HIGH 3.3V)
eSPIESPI_IO0..3 / CLK / CS# / RST#buses1.8V eSPI host interface to modern Intel/AMD SoC
SMBusSMB_CLK / SMB_DATAbusesSMBus master lines to Charger, Battery & USB-C PD

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using IT81202E

Search SchemCAD interactive schematics and BoardViews to locate IT81202E across 39,000+ indexed laptop motherboards.

🔎 IT81202E →

Technical Repair FAQ — IT81202E

What is IT81202E used for on a laptop motherboard?
IT81202E by ITE Tech is a EC/KBC Controllers integrated circuit in a VFBGA / LQFP package (input voltage 3.3V / 1.8V; output/spec: RISC-V eSPI Embedded Controller). Next-gen 32-bit RISC-V eSPI Embedded Controller in recent Lenovo/Asus laptops
What is the SMD marking code for IT81202E?
The top silkscreen SMD marking code for IT81202E is IT81202 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Только идентичный IT81202 с прошивкой.
What are the key diagnostic pins / startup conditions of IT81202E?
Key multimeter diagnostic pin measurements for IT81202E: Pin VSTBY (VSTBY (+3VALW)): Standby +3.3VALW supply (NOTE: eSPI/FSPI I/O rail is often 1.8V!); Pin AVCC (AVCC): Analog ADC reference supply; Pin 14 (WRST#): EC Reset pin (valid HIGH 3.3V); Pin eSPI (ESPI_IO0..3 / CLK / CS# / RST#): 1.8V eSPI host interface to modern Intel/AMD SoC; Pin SMBus (SMB_CLK / SMB_DATA): SMBus master lines to Charger, Battery & USB-C PD.
Which laptop motherboards use IT81202E (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate IT81202E across 39,000+ laptop schematics and BoardView layouts.