CAD SchemCAD
EC/KBC ControllersITE TechSMD (см. даташит / корпус на плате)

IT8986F — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)

Manufacturer
ITE Tech
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
3.3V (+3VALW / VSTBY), 1.8V (eSPI)
Output / Architecture
Laptop Embedded Controller (EC / KBC)
SMD Top Marking
IT8986F

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (IT8986F)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact IT8986F suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using IT8986F

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLenovo CE475 NM-A861 REV 1.0NM-A861Schematic Page #3Open Schematic →
LenovoLenovo LCFC JINN DOOKU Rev 0.1 SDV SchematicNM-A861Schematic Page #3Open Schematic →

Technical Repair FAQ — IT8986F

What is IT8986F used for on a laptop motherboard?
IT8986F by ITE Tech is a EC/KBC Controllers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V (+3VALW / VSTBY), 1.8V (eSPI); output/spec: Laptop Embedded Controller (EC / KBC)). ITE Embedded Controller (manages power sequencing, charger, keyboard & fans; most IT858x/898x/557x series require internal Flash programming)
What is the SMD marking code for IT8986F?
IT8986F is top-marked directly with its part identifier (IT8986F) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of IT8986F?
Verify main supply rail (3.3V (+3VALW / VSTBY), 1.8V (eSPI)), output impedance on Laptop Embedded Controller (EC / KBC), and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use IT8986F (donor boards)?
Confirmed laptop donor motherboards using IT8986F include: Lenovo Lenovo CE475 NM-A861 REV 1.0 (NM-A861), Lenovo Lenovo LCFC JINN DOOKU Rev 0.1 SDV Schematic (NM-A861). Search SchemCAD for additional board revisions.