CAD SchemCAD
EC/KBC ControllersENE TechnologyLQFP-128 / BGA

KB9032Q-C — Datasheet PDF, Startup Pinout (VCC (+3VLP), AVCC, ECRST#, RSMRST# / ON_OFF#), SMD Code, Equivalents & Donor Boards

ENE eSPI Embedded Controller with internal Flash on modern Compal motherboards

Manufacturer
ENE Technology
Subsystem Category
Package / Case
LQFP-128 / BGA
Input Voltage (VIN / VCC)
3.3V / 1.8V
Output / Architecture
eSPI Embedded Controller (128KB Flash)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — KB9032Q-C

Pin # Signal Name Role Voltage / Diagnostic Description
9,22,33,96,111,125VCC (+3VLP)power_inStandby +3.3VLP supply from Buck LDO
67AVCCpower_inAnalog ADC power supply
37ECRST#controlActive-LOW EC reset input (must be 3.3V)
110/114RSMRST# / ON_OFF#controlPower sequence pins: ON/OFF# input & PCH_RSMRST# output
59-62,42EDI_CS/CLK/DIN/DO + KSO3busesEDI ISP programming pins on keyboard FPC (pull pin 42 KSO3 to GND)

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using KB9032Q-C

Search SchemCAD interactive schematics and BoardViews to locate KB9032Q-C across 39,000+ indexed laptop motherboards.

🔎 KB9032Q-C →

Technical Repair FAQ — KB9032Q-C

What is KB9032Q-C used for on a laptop motherboard?
KB9032Q-C by ENE Technology is a EC/KBC Controllers integrated circuit in a LQFP-128 / BGA package (input voltage 3.3V / 1.8V; output/spec: eSPI Embedded Controller (128KB Flash)). ENE eSPI Embedded Controller with internal Flash on modern Compal motherboards
What is the SMD marking code for KB9032Q-C?
The top silkscreen SMD marking code for KB9032Q-C is KB9032Q (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: KB9032Q-C.
What are the key diagnostic pins / startup conditions of KB9032Q-C?
Key multimeter diagnostic pin measurements for KB9032Q-C: Pin 9,22,33,96,111,125 (VCC (+3VLP)): Standby +3.3VLP supply from Buck LDO; Pin 67 (AVCC): Analog ADC power supply; Pin 37 (ECRST#): Active-LOW EC reset input (must be 3.3V); Pin 110/114 (RSMRST# / ON_OFF#): Power sequence pins: ON/OFF# input & PCH_RSMRST# output; Pin 59-62,42 (EDI_CS/CLK/DIN/DO + KSO3): EDI ISP programming pins on keyboard FPC (pull pin 42 KSO3 to GND).
Which laptop motherboards use KB9032Q-C (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate KB9032Q-C across 39,000+ laptop schematics and BoardView layouts.