CAD SchemCAD
منظمات الجهد الأولية 3.3V/5V Buck PWMMonolithic Power Systems (MPS)SMD (см. даташит / корпус на плате)

MP2147-VPP25 — ملف Datasheet PDF ومخطط الأطراف وشروط الإقلاع والبدائل

MPS Monolithic Synchronous Step-Down Converter for standby/memory rails

الشركة المصنعة
Monolithic Power Systems (MPS)
الغلاف (Package)
SMD (см. даташит / корпус на плате)
جهد الدخل (VIN / VCC)
4.5V – 24V
الخرج / البنية
Monolithic Synchronous Buck Converter
كود SMD العلوي
MP2147-VPP25

أكواد SMD والبدائل المتوافقة (Equivalents)

أكواد الطباعة السطحية SMD

مطبوع بالرقم المباشر للقطعة (MP2147-VPP25)

البدائل المطابقة (Pin-to-Pin)

لا يوجد بديل عام مباشر مؤكد — استخدم نفس الرقم MP2147-VPP25 مع مراجعة المخطط.

تحقق دائماً من شكل الغلاف QFN/SOIC وقطبية إشارات ACOK / EN في المخطط قبل لحام البديل.

بوردات اللابتوب المانحة التي تحتوي على MP2147-VPP25

الشركة موديل اللابتوب / البوردة رمز المنصة صفحة المخطط إجراء
MSIMSI H110M PRO-VD VH MS-7996 REV1.2MS-7996Schematic Page #1فتح المخطط ←
MSIMSI H110M PRO-VD VH MS-7996 REV1.3MS-7996Schematic Page #1فتح المخطط ←
MSIMSI MS-7994 VER 1.2MS-7994Schematic Page #1فتح المخطط ←
MSIMSI MS-7995 REV1.0MS-7995Schematic Page #1فتح المخطط ←
MSIMSI MS-7995 REV1.1MS-7995Schematic Page #1فتح المخطط ←
MSIMSI MS-7995 REV1.2MS-7995Schematic Page #1فتح المخطط ←
MSIMSI MS-7996 r1.0MS-7996Schematic Page #1فتح المخطط ←
MSIMSI MS-7A65 REV 1.0MS-7A65Schematic Page #1فتح المخطط ←

الأسئلة الشائعة لصيانة MP2147-VPP25

What is MP2147-VPP25 used for on a laptop motherboard?
MP2147-VPP25 by Monolithic Power Systems (MPS) is a منظمات الجهد الأولية 3.3V/5V Buck PWM integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: Monolithic Synchronous Buck Converter). MPS Monolithic Synchronous Step-Down Converter for standby/memory rails
What is the SMD marking code for MP2147-VPP25?
MP2147-VPP25 is top-marked directly with its part identifier (MP2147-VPP25) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of MP2147-VPP25?
Verify main supply rail (4.5V – 24V), output impedance on Monolithic Synchronous Buck Converter, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use MP2147-VPP25 (donor boards)?
Confirmed laptop donor motherboards using MP2147-VPP25 include: MSI MSI H110M PRO-VD VH MS-7996 REV1.2 (MS-7996), MSI MSI H110M PRO-VD VH MS-7996 REV1.3 (MS-7996), MSI MSI MS-7994 VER 1.2 (MS-7994), MSI MSI MS-7995 REV1.0 (MS-7995), MSI MSI MS-7995 REV1.1 (MS-7995). Search SchemCAD for additional board revisions.