CAD SchemCAD
IC Nguồn Xung 3V/5V (3.3V/5V Buck PWM)Monolithic Power Systems (MPS)SMD (см. даташит / корпус на плате)

MP2329C-FORCE — Datasheet PDF, Sơ đồ chân, Mã lưng SMD, IC Tương đương & Main xác

MPS Monolithic Synchronous Step-Down Converter for standby/memory rails

Hãng sản xuất
Monolithic Power Systems (MPS)
Kiểu chân (Package)
SMD (см. даташит / корпус на плате)
Điện áp vào (VIN / VCC)
4.5V – 24V
Ngõ ra / Cấu trúc
Monolithic Synchronous Buck Converter
Mã lưng SMD
MP2329C-FORCE

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD

In trực tiếp tên mã linh kiện (MP2329C-FORCE)

IC Tương Đương Thay Thế Chân-Đổi-Chân

Chưa có mã tương đương phổ thông — nên thay đúng mã MP2329C-FORCE.

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa MP2329C-FORCE

Hãng Dòng Máy / Tên Main Mã Main Trang Sơ Đồ Thao Tác
MSIMSI MS-7C51 REV 1.1MS-7C51Schematic Page #35Mở Sơ Đồ →

Câu Hỏi Kỹ Thuật Thường Gặp — MP2329C-FORCE

What is MP2329C-FORCE used for on a laptop motherboard?
MP2329C-FORCE by Monolithic Power Systems (MPS) is a IC Nguồn Xung 3V/5V (3.3V/5V Buck PWM) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: Monolithic Synchronous Buck Converter). MPS Monolithic Synchronous Step-Down Converter for standby/memory rails
What is the SMD marking code for MP2329C-FORCE?
MP2329C-FORCE is top-marked directly with its part identifier (MP2329C-FORCE) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of MP2329C-FORCE?
Verify main supply rail (4.5V – 24V), output impedance on Monolithic Synchronous Buck Converter, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use MP2329C-FORCE (donor boards)?
Confirmed laptop donor motherboards using MP2329C-FORCE include: MSI MSI MS-7C51 REV 1.1 (MS-7C51). Search SchemCAD for additional board revisions.