What is MP2949AGQKT used for on a laptop motherboard?
MP2949AGQKT by Monolithic Power Systems (MPS) is a PWM Vcore de CPU/GPU integrated circuit in a QFN-52 package (input voltage 3.3V / 5V; output/spec: Digital Multi-Phase CPU/GPU PWM (MTP Config)). MPS Digital Multi-Phase Controller paired with MP869xx Intelli-Phase DrMOS (requires matching board MTP config!)
What is the SMD marking code for MP2949AGQKT?
The top silkscreen SMD marking code for MP2949AGQKT is MP2949A, 2949A (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Донор MP2949A с такой же материнской платы.
What are the key diagnostic pins / startup conditions of MP2949AGQKT?
Key multimeter diagnostic pin measurements for MP2949AGQKT: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use MP2949AGQKT (donor boards)?
Confirmed laptop donor motherboards using MP2949AGQKT include: Dell Dell Compal LA-F371P r1.0 (LA-F371P), Lenovo LENOVO YOGA 920 LCFC NM-B291 DYG60 REV 1.0 (NM-B291), Dell Dell XPS 13 9380 LA-E672P Schematic (LA-E672P), Lenovo Lenovo FG541 FG741 NM-C362 (NM-C362), Lenovo Lenovo LCFC NM-C541 Y540 N18P-G0 (NM-C541). Search SchemCAD for additional board revisions.