CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)MacronixSOIC-8 / WSON-8

MX25L25645 — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

256Mbit (32MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Macronix, MX25L series = 3.3V). Preserve QE bit when flashing

Manufacturer
Macronix
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
256Mbit (32MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
MX25L25645

Multimeter Diagnostic & Startup Pinout Table — MX25L25645

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (MX25L25645)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact MX25L25645 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using MX25L25645

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellOptiPlex 3070 D9.5 MFF COUGAR MLK A00—Schematic Page #26Open Schematic →
OEMPegatron IPCFL-CG rA00—Schematic Page #26Open Schematic →

Technical Repair FAQ — MX25L25645

What is MX25L25645 used for on a laptop motherboard?
MX25L25645 by Macronix is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 256Mbit (32MB) 3.3V SPI NOR BIOS/EC Flash). 256Mbit (32MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Macronix, MX25L series = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for MX25L25645?
MX25L25645 is top-marked directly with its part identifier (MX25L25645) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of MX25L25645?
Key multimeter diagnostic pin measurements for MX25L25645: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use MX25L25645 (donor boards)?
Confirmed laptop donor motherboards using MX25L25645 include: Dell OptiPlex 3070 D9.5 MFF COUGAR MLK A00, OEM Pegatron IPCFL-CG rA00. Search SchemCAD for additional board revisions.