CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)MacronixSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

MX25U1001E — Datasheet PDF, Startup Pinout (VCC (1.8V!), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

⚠️ 1.8V ONLY! 1Mbit (128KB) Serial SPI NOR Flash (Macronix, MX25U series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Manufacturer
Macronix
Package / Case
SOIC-8 / WSON-8 / USON-8
Input Voltage (VIN / VCC)
1.65V – 1.95V (1.8V ONLY)
Output / Architecture
1Mbit (128KB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
SMD Top Marking
MX25U1001E

Multimeter Diagnostic & Startup Pinout Table — MX25U1001E

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (MX25U1001E)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact MX25U1001E suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using MX25U1001E

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellDell Inspiron 3162 Wistron Rocket BSW 11.6 15239-1 Rev A0015239-1Schematic Page #2Open Schematic →
LenovoLENOVO IdeaPad 1-14ADA05 - LS1511D - 19877-119877-1Schematic Page #25Open Schematic →

Technical Repair FAQ — MX25U1001E

What is MX25U1001E used for on a laptop motherboard?
MX25U1001E by Macronix is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 1Mbit (128KB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 1Mbit (128KB) Serial SPI NOR Flash (Macronix, MX25U series = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for MX25U1001E?
MX25U1001E is top-marked directly with its part identifier (MX25U1001E) on the SOIC-8 / WSON-8 / USON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of MX25U1001E?
Key multimeter diagnostic pin measurements for MX25U1001E: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: MX25U1001E is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use MX25U1001E (donor boards)?
Confirmed laptop donor motherboards using MX25U1001E include: Dell Dell Inspiron 3162 Wistron Rocket BSW 11.6 15239-1 Rev A00 (15239-1), Lenovo LENOVO IdeaPad 1-14ADA05 - LS1511D - 19877-1 (19877-1). Search SchemCAD for additional board revisions.