CAD SchemCAD
CPU/GPU Vcore PWMonsemiQFN-52 (6x6mm)

NCP81226MNTXG — Datasheet PDF, Startup Pinout (VCC, VR_ON, VDIO/VCLK/ALERT#, PWM1/PWM2/PWM3), SMD Code, Equivalents & Donor Boards

Triple-Output IMVP8 SVID Buck Controller for Ultrabook CPUs

Manufacturer
onsemi
Subsystem Category
Package / Case
QFN-52 (6x6mm)
Input Voltage (VIN / VCC)
5V (VCC)
Output / Architecture
IMVP8 Triple-Output SVID Controller
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — NCP81226MNTXG

Pin # Signal Name Role Voltage / Diagnostic Description
VCC/VDDVCCpower_in+5V controller logic supply
VR_ONVR_ONcontrolVcore enable input from EC/PCH
SVIDVDIO/VCLK/ALERT#busesIntel SVID 3-wire serial VID bus (DATA, CLK, ALERT#)
PWM1..NPWM1/PWM2/PWM3outputsTri-state PWM outputs to DrMOS stages / gate drivers
VR_READYVR_HOT#/PGOODoutputsVcore Power-Good (VR_READY) & thermal throttle VR_HOT#

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using NCP81226MNTXG

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
AcerAcer B36H4-AD r1.1DATASHEETSchematic Page #43Open Schematic →
DellDELL 17529-1 VER A0017529-1Schematic Page #44Open Schematic →
Lenovolenovo ThinkCentre M70s I470MS V1.0 schematic—Schematic Page #1Open Schematic →
DellDell Vostro Inspiron 3470 17530-1 gambit-mlk-sff Schematic17530-1Schematic Page #44Open Schematic →
LenovoLenovo NM-A851 Rev 1.0 SchematicNM-A851Schematic Page #51Open Schematic →
AcerAcer Swift 1 SF113-31 Pegatron AS3EA UMA Armani r2.0 Schematic—Schematic Page #80Open Schematic →
AcerSwift 1 SF113-31 Pegatron AS3EA Armani r2.0—Schematic Page #80Open Schematic →

Technical Repair FAQ — NCP81226MNTXG

What is NCP81226MNTXG used for on a laptop motherboard?
NCP81226MNTXG by onsemi is a CPU/GPU Vcore PWM integrated circuit in a QFN-52 (6x6mm) package (input voltage 5V (VCC); output/spec: IMVP8 Triple-Output SVID Controller). Triple-Output IMVP8 SVID Buck Controller for Ultrabook CPUs
What is the SMD marking code for NCP81226MNTXG?
The top silkscreen SMD marking code for NCP81226MNTXG is 81226, NCP81226 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: NCP81226MNTXG.
What are the key diagnostic pins / startup conditions of NCP81226MNTXG?
Key multimeter diagnostic pin measurements for NCP81226MNTXG: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use NCP81226MNTXG (donor boards)?
Confirmed laptop donor motherboards using NCP81226MNTXG include: Acer Acer B36H4-AD r1.1 (DATASHEET), Dell DELL 17529-1 VER A00 (17529-1), Lenovo lenovo ThinkCentre M70s I470MS V1.0 schematic, Dell Dell Vostro Inspiron 3470 17530-1 gambit-mlk-sff Schematic (17530-1), Lenovo Lenovo NM-A851 Rev 1.0 Schematic (NM-A851). Search SchemCAD for additional board revisions.