CAD SchemCAD
CPU/GPU 核心供电多相 PWM (Vcore PWM)onsemiQFN-52 (6x6mm)

NCP81226MNTXG — 官方 PDF 数据手册、关键引脚电压 (VCC, VR_ON, VDIO/VCLK/ALERT#, PWM1/PWM2/PWM3)、丝印反查与笔记本料板

Triple-Output IMVP8 SVID Buck Controller for Ultrabook CPUs

芯片厂商
onsemi
封装形式
QFN-52 (6x6mm)
输入电压 (VIN / VCC)
5V (VCC)
输出规格 / 架构
IMVP8 Triple-Output SVID Controller
顶部 SMD 丝印

万用表检修关键引脚与开启条件表 — NCP81226MNTXG

引脚 # 信号名称 功能角色 正常电压参考 / 万用表检修说明
VCC/VDDVCCpower_in+5V controller logic supply
VR_ONVR_ONcontrolVcore enable input from EC/PCH
SVIDVDIO/VCLK/ALERT#busesIntel SVID 3-wire serial VID bus (DATA, CLK, ALERT#)
PWM1..NPWM1/PWM2/PWM3outputsTri-state PWM outputs to DrMOS stages / gate drivers
VR_READYVR_HOT#/PGOODoutputsVcore Power-Good (VR_READY) & thermal throttle VR_HOT#

SMD 丝印代码与兼容代换型号 (Equivalents)

芯片顶部丝印代码 (Top Marking)
原位兼容代换型号 (Pin-to-Pin)

代换焊接前请务必核对 QFN/SOIC 封装脚数、LDO 线性输出顺序及 ACOK / EN 信号极性。

使用 NCP81226MNTXG 的笔记本料板型号表 (Donor Motherboards)

品牌 笔记本机型 / 主板名称 主板版号 图纸页码 操作
AcerAcer B36H4-AD r1.1DATASHEETSchematic Page #43查看图纸 →
DellDELL 17529-1 VER A0017529-1Schematic Page #44查看图纸 →
Lenovolenovo ThinkCentre M70s I470MS V1.0 schematic—Schematic Page #1查看图纸 →
DellDell Vostro Inspiron 3470 17530-1 gambit-mlk-sff Schematic17530-1Schematic Page #44查看图纸 →
LenovoLenovo NM-A851 Rev 1.0 SchematicNM-A851Schematic Page #51查看图纸 →
AcerAcer Swift 1 SF113-31 Pegatron AS3EA UMA Armani r2.0 Schematic—Schematic Page #80查看图纸 →
AcerSwift 1 SF113-31 Pegatron AS3EA Armani r2.0—Schematic Page #80查看图纸 →

芯片级维修常见问题 (FAQ) — NCP81226MNTXG

What is NCP81226MNTXG used for on a laptop motherboard?
NCP81226MNTXG by onsemi is a CPU/GPU 核心供电多相 PWM (Vcore PWM) integrated circuit in a QFN-52 (6x6mm) package (input voltage 5V (VCC); output/spec: IMVP8 Triple-Output SVID Controller). Triple-Output IMVP8 SVID Buck Controller for Ultrabook CPUs
What is the SMD marking code for NCP81226MNTXG?
The top silkscreen SMD marking code for NCP81226MNTXG is 81226, NCP81226 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: NCP81226MNTXG.
What are the key diagnostic pins / startup conditions of NCP81226MNTXG?
Key multimeter diagnostic pin measurements for NCP81226MNTXG: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use NCP81226MNTXG (donor boards)?
Confirmed laptop donor motherboards using NCP81226MNTXG include: Acer Acer B36H4-AD r1.1 (DATASHEET), Dell DELL 17529-1 VER A00 (17529-1), Lenovo lenovo ThinkCentre M70s I470MS V1.0 schematic, Dell Dell Vostro Inspiron 3470 17530-1 gambit-mlk-sff Schematic (17530-1), Lenovo Lenovo NM-A851 Rev 1.0 Schematic (NM-A851). Search SchemCAD for additional board revisions.