CAD SchemCAD
PWM Multiface CPU/GPU VcoreonsemiSMD (см. даташит / корпус на плате)

NCP81269 — Datasheet PDF, Pinout, Código SMD, Equivalentes y Placas Donantes

onsemi Multi-Phase Buck PWM Controller for Intel CPU or NVIDIA GeForce GPU Vcore

Fabricante
onsemi
Encapsulado
SMD (см. даташит / корпус на плате)
Voltaje de Entrada (VIN)
5V (VCC)
Salida / Arquitectura
Multi-Phase CPU / NVIDIA GPU Vcore PWM
Código SMD
NCP81269

Códigos SMD y Reemplazos Compatibles (Equivalentes)

Códigos de Marcado Superior SMD

Marcado directo con código de parte (NCP81269)

Equivalentes Pin a Pin y Reemplazos

Sin reemplazo universal directo; utilice NCP81269 original verificando el esquema.

Verifique siempre el encapsulado QFN/SOIC y la polaridad de ACOK / EN en el esquema antes de soldar un equivalente.

Placas Base Donantes de Portátiles con NCP81269

Marca Modelo de Portátil / Placa Plataforma Página Esquema Acción
MSIMSI MS-7D15 REV 1.0 2.0MS-7D15Schematic Page #60Ver Esquema →
LenovoLENOVO I4X0MS VER1.0—Schematic Page #32Ver Esquema →

Preguntas Frecuentes de Reparación — NCP81269

What is NCP81269 used for on a laptop motherboard?
NCP81269 by onsemi is a PWM Multiface CPU/GPU Vcore integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 5V (VCC); output/spec: Multi-Phase CPU / NVIDIA GPU Vcore PWM). onsemi Multi-Phase Buck PWM Controller for Intel CPU or NVIDIA GeForce GPU Vcore
What is the SMD marking code for NCP81269?
NCP81269 is top-marked directly with its part identifier (NCP81269) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of NCP81269?
Verify main supply rail (5V (VCC)), output impedance on Multi-Phase CPU / NVIDIA GPU Vcore PWM, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use NCP81269 (donor boards)?
Confirmed laptop donor motherboards using NCP81269 include: MSI MSI MS-7D15 REV 1.0 2.0 (MS-7D15), Lenovo LENOVO I4X0MS VER1.0. Search SchemCAD for additional board revisions.