CAD SchemCAD
CPU/GPU Vcore PWMonsemiQFN-52 (6x6mm)

NCP81526MNTXG — Datasheet PDF, Startup Pinout (VCC, VR_ON, VDIO/VCLK/ALERT#, PWM1/PWM2/PWM3), SMD Code, Equivalents & Donor Boards

Intel IMVP9 / IMVP9.1 Multi-Rail SVID CPU Controller driving DrMOS stages

Manufacturer
onsemi
Subsystem Category
Package / Case
QFN-52 (6x6mm)
Input Voltage (VIN / VCC)
5V (VCC)
Output / Architecture
IMVP9 / IMVP9.1 Multi-Phase CPU Controller
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — NCP81526MNTXG

Pin # Signal Name Role Voltage / Diagnostic Description
VCC/VDDVCCpower_in+5V controller logic supply
VR_ONVR_ONcontrolVcore enable input from EC/PCH
SVIDVDIO/VCLK/ALERT#busesIntel SVID 3-wire serial VID bus (DATA, CLK, ALERT#)
PWM1..NPWM1/PWM2/PWM3outputsTri-state PWM outputs to DrMOS stages / gate drivers
VR_READYVR_HOT#/PGOODoutputsVcore Power-Good (VR_READY) & thermal throttle VR_HOT#

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using NCP81526MNTXG

Search SchemCAD interactive schematics and BoardViews to locate NCP81526MNTXG across 39,000+ indexed laptop motherboards.

🔎 NCP81526MNTXG →

Technical Repair FAQ — NCP81526MNTXG

What is NCP81526MNTXG used for on a laptop motherboard?
NCP81526MNTXG by onsemi is a CPU/GPU Vcore PWM integrated circuit in a QFN-52 (6x6mm) package (input voltage 5V (VCC); output/spec: IMVP9 / IMVP9.1 Multi-Phase CPU Controller). Intel IMVP9 / IMVP9.1 Multi-Rail SVID CPU Controller driving DrMOS stages
What is the SMD marking code for NCP81526MNTXG?
The top silkscreen SMD marking code for NCP81526MNTXG is 81526, NCP81526 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Только NCP81526MNTXG.
What are the key diagnostic pins / startup conditions of NCP81526MNTXG?
Key multimeter diagnostic pin measurements for NCP81526MNTXG: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use NCP81526MNTXG (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate NCP81526MNTXG across 39,000+ laptop schematics and BoardView layouts.