CAD SchemCAD
IC Nguồn CPU/GPU Vcore PWMonsemiQFN-52 (6x6mm)

NCP81526MNTXG — Datasheet PDF, Sơ đồ chân (VCC, VR_ON, VDIO/VCLK/ALERT#, PWM1/PWM2/PWM3), Mã lưng SMD, IC Tương đương & Main xác

Intel IMVP9 / IMVP9.1 Multi-Rail SVID CPU Controller driving DrMOS stages

Hãng sản xuất
onsemi
Phân loại khối
Kiểu chân (Package)
QFN-52 (6x6mm)
Điện áp vào (VIN / VCC)
5V (VCC)
Ngõ ra / Cấu trúc
IMVP9 / IMVP9.1 Multi-Phase CPU Controller
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — NCP81526MNTXG

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
VCC/VDDVCCpower_in+5V controller logic supply
VR_ONVR_ONcontrolVcore enable input from EC/PCH
SVIDVDIO/VCLK/ALERT#busesIntel SVID 3-wire serial VID bus (DATA, CLK, ALERT#)
PWM1..NPWM1/PWM2/PWM3outputsTri-state PWM outputs to DrMOS stages / gate drivers
VR_READYVR_HOT#/PGOODoutputsVcore Power-Good (VR_READY) & thermal throttle VR_HOT#

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa NCP81526MNTXG

Tìm kiếm vị trí NCP81526MNTXG trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 NCP81526MNTXG →

Câu Hỏi Kỹ Thuật Thường Gặp — NCP81526MNTXG

What is NCP81526MNTXG used for on a laptop motherboard?
NCP81526MNTXG by onsemi is a IC Nguồn CPU/GPU Vcore PWM integrated circuit in a QFN-52 (6x6mm) package (input voltage 5V (VCC); output/spec: IMVP9 / IMVP9.1 Multi-Phase CPU Controller). Intel IMVP9 / IMVP9.1 Multi-Rail SVID CPU Controller driving DrMOS stages
What is the SMD marking code for NCP81526MNTXG?
The top silkscreen SMD marking code for NCP81526MNTXG is 81526, NCP81526 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Только NCP81526MNTXG.
What are the key diagnostic pins / startup conditions of NCP81526MNTXG?
Key multimeter diagnostic pin measurements for NCP81526MNTXG: Pin VCC/VDD (VCC): +5V controller logic supply; Pin VR_ON (VR_ON): Vcore enable input from EC/PCH; Pin SVID (VDIO/VCLK/ALERT#): Intel SVID 3-wire serial VID bus (DATA, CLK, ALERT#); Pin PWM1..N (PWM1/PWM2/PWM3): Tri-state PWM outputs to DrMOS stages / gate drivers; Pin VR_READY (VR_HOT#/PGOOD): Vcore Power-Good (VR_READY) & thermal throttle VR_HOT#.
Which laptop motherboards use NCP81526MNTXG (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate NCP81526MNTXG across 39,000+ laptop schematics and BoardView layouts.