CAD SchemCAD
المتحكمات المدمجة EC/KBC Super I/ONuvotonSMD (см. даташит / корпус на плате)

NPCE985PB1 — ملف Datasheet PDF ومخطط الأطراف وشروط الإقلاع والبدائل

Nuvoton Laptop Embedded Controller / Hardware Monitor IC

الشركة المصنعة
Nuvoton
الغلاف (Package)
SMD (см. даташит / корпус на плате)
جهد الدخل (VIN / VCC)
3.3V (+3VPCU)
الخرج / البنية
Laptop Embedded Controller / Super I/O
كود SMD العلوي
NPCE985PB1

أكواد SMD والبدائل المتوافقة (Equivalents)

أكواد الطباعة السطحية SMD

مطبوع بالرقم المباشر للقطعة (NPCE985PB1)

البدائل المطابقة (Pin-to-Pin)

لا يوجد بديل عام مباشر مؤكد — استخدم نفس الرقم NPCE985PB1 مع مراجعة المخطط.

تحقق دائماً من شكل الغلاف QFN/SOIC وقطبية إشارات ACOK / EN في المخطط قبل لحام البديل.

بوردات اللابتوب المانحة التي تحتوي على NPCE985PB1

الشركة موديل اللابتوب / البوردة رمز المنصة صفحة المخطط إجراء
Dell1 Inspiron 3451 355114214-1Schematic Page #2فتح المخطط ←
DellDell Inspiron 3162 Wistron Rocket BSW 11.6 15239-1 Rev A0015239-1Schematic Page #2فتح المخطط ←

الأسئلة الشائعة لصيانة NPCE985PB1

What is NPCE985PB1 used for on a laptop motherboard?
NPCE985PB1 by Nuvoton is a المتحكمات المدمجة EC/KBC Super I/O integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V (+3VPCU); output/spec: Laptop Embedded Controller / Super I/O). Nuvoton Laptop Embedded Controller / Hardware Monitor IC
What is the SMD marking code for NPCE985PB1?
NPCE985PB1 is top-marked directly with its part identifier (NPCE985PB1) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of NPCE985PB1?
Verify main supply rail (3.3V (+3VPCU)), output impedance on Laptop Embedded Controller / Super I/O, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use NPCE985PB1 (donor boards)?
Confirmed laptop donor motherboards using NPCE985PB1 include: Dell 1 Inspiron 3451 3551 (14214-1), Dell Dell Inspiron 3162 Wistron Rocket BSW 11.6 15239-1 Rev A00 (15239-1). Search SchemCAD for additional board revisions.