CAD SchemCAD
IC Nguồn Xung 3V/5V (3.3V/5V Buck PWM)STMicroelectronicsVFQFPN-24 / QFN-32

PM6686TR — Datasheet PDF, Sơ đồ chân (VIN, LDO3/LDO5, EN1/EN2, PGOOD), Mã lưng SMD, IC Tương đương & Main xác

Dual Step-Down Controller for +3.3V / +5V standby rails with 100mA LDO3/LDO5

Hãng sản xuất
STMicroelectronics
Kiểu chân (Package)
VFQFPN-24 / QFN-32
Điện áp vào (VIN / VCC)
6V – 28V
Ngõ ra / Cấu trúc
Dual 3.3V / 5V Buck PWM (Classic MacBook / Asus)
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — PM6686TR

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
VINVINpower_inMain supply input 6–28V
LDO3/LDO5LDO3/LDO5outputs3.3V and 5V standby LDO outputs
ON1/ON2EN1/EN2controlChannel 1/2 enable inputs
PGOODPGOODoutputsPower-Good open-drain output

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa PM6686TR

Tìm kiếm vị trí PM6686TR trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 PM6686TR →

Câu Hỏi Kỹ Thuật Thường Gặp — PM6686TR

What is PM6686TR used for on a laptop motherboard?
PM6686TR by STMicroelectronics is a IC Nguồn Xung 3V/5V (3.3V/5V Buck PWM) integrated circuit in a VFQFPN-24 / QFN-32 package (input voltage 6V – 28V; output/spec: Dual 3.3V / 5V Buck PWM (Classic MacBook / Asus)). Dual Step-Down Controller for +3.3V / +5V standby rails with 100mA LDO3/LDO5
What is the SMD marking code for PM6686TR?
The top silkscreen SMD marking code for PM6686TR is PM6686, 6686 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: TPS51980 / TPS51125 (СТРОГО сверять корпус QFN-24 vs QFN-32!).
What are the key diagnostic pins / startup conditions of PM6686TR?
Key multimeter diagnostic pin measurements for PM6686TR: Pin VIN (VIN): Main supply input 6–28V; Pin LDO3/LDO5 (LDO3/LDO5): 3.3V and 5V standby LDO outputs; Pin ON1/ON2 (EN1/EN2): Channel 1/2 enable inputs; Pin PGOOD (PGOOD): Power-Good open-drain output.
Which laptop motherboards use PM6686TR (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate PM6686TR across 39,000+ laptop schematics and BoardView layouts.