CAD SchemCAD
PWM Primário 3.3V/5V (3.3V/5V Buck PWM)SilergySMD (см. даташит / корпус на плате)

SY8270CEN — Datasheet PDF, Pinagem (Pinout), Código SMD, Equivalentes e Placas Doadoras

Silergy Synchronous Step-Down Buck Regulator (commonly used for +3.3VALW / +5VALW & secondary rails)

Fabricante
Silergy
Encapsulamento
SMD (см. даташит / корпус на плате)
Tensão de Entrada (VIN)
4V – 24V
Saída / Arquitetura
High-Efficiency Synchronous Buck Regulator
Marcação SMD
SY8270CEN

Códigos SMD e Substitutos Compatíveis (Equivalentes)

Códigos de Marcação SMD

Marcação direta com código da peça (SY8270CEN)

Equivalentes Pino a Pino

Sem substituto universal direto — utilize SY8270CEN conferindo o esquema elétrico.

Confira sempre o encapsulamento QFN/SOIC e a polaridade de ACOK / EN no esquema antes da substituição.

Placas-Mãe Doadoras (Sucata) com SY8270CEN

Marca Modelo do Notebook / Placa Plataforma Página Esquema Ação
HPHP Quanta X9M DA0X9MMB8F0 1ADA0X9MMB8F0Schematic Page #45Abrir Esquema →

Perguntas Frequentes de Reparo — SY8270CEN

What is SY8270CEN used for on a laptop motherboard?
SY8270CEN by Silergy is a PWM Primário 3.3V/5V (3.3V/5V Buck PWM) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4V – 24V; output/spec: High-Efficiency Synchronous Buck Regulator). Silergy Synchronous Step-Down Buck Regulator (commonly used for +3.3VALW / +5VALW & secondary rails)
What is the SMD marking code for SY8270CEN?
SY8270CEN is top-marked directly with its part identifier (SY8270CEN) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of SY8270CEN?
Verify main supply rail (4V – 24V), output impedance on High-Efficiency Synchronous Buck Regulator, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use SY8270CEN (donor boards)?
Confirmed laptop donor motherboards using SY8270CEN include: HP HP Quanta X9M DA0X9MMB8F0 1A (DA0X9MMB8F0). Search SchemCAD for additional board revisions.