What is TPS51275BRUKR used for on a laptop motherboard?
TPS51275BRUKR by Texas Instruments is a 3.3V/5V Buck PWM integrated circuit in a WQFN-20 (3x3mm) package (input voltage 5.5V – 24V; output/spec: Dual 5V / 3.3V D-CAP2 Buck Controller). Low-Quiescent Dual 5V / 3.3V Synchronous Buck Controller with VREG3/VREG5 LDOs
What is the SMD marking code for TPS51275BRUKR?
The top silkscreen SMD marking code for TPS51275BRUKR is 1275B, 51275B (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: TPS51225C.
What are the key diagnostic pins / startup conditions of TPS51275BRUKR?
Key multimeter diagnostic pin measurements for TPS51275BRUKR: Pin 12 (VIN): Main supply input 5.5V–24V from B+ rail; Pin 3 (VREG3): Always-on 3.3V LDO output (short here often points to dead EC); Pin 13 (VREG5): Always-on 5V LDO output for gate drivers; Pin 20/6 (EN1/EN2): Logic enable inputs for SMPS1 (+5VALW) and SMPS2 (+3VALW); Pin 16/15 (DRVH1/DRVL1): High-side and low-side gate drive outputs for Ch1.
Which laptop motherboards use TPS51275BRUKR (donor boards)?
Confirmed laptop donor motherboards using TPS51275BRUKR include: Lenovo LENOVO 520-24ARR - ECA20 - LA-F902P REV1.0 (LA-F902P), Lenovo Lenovo Air 15ITL 202 - LCFC NM-D211 (NM-D211), Lenovo Lenovo NM-C681 S550 Rev01 (NM-C681), Lenovo Lenovo NM-D131 Rev0.2 (NM-D131), Lenovo LENOVO M75Q-2 AM4IV. Search SchemCAD for additional board revisions.