CAD SchemCAD
PWM Buck 3.3V/5V Always (3.3V/5V Buck PWM)Texas InstrumentsSMD (см. даташит / корпус на плате)

TPS51318 — Datasheet PDF, Pinout, Código SMD, Equivalentes y Placas Donantes

Texas Instruments Synchronous Step-Down Buck Controller / Converter for laptop system rails

Fabricante
Texas Instruments
Encapsulado
SMD (см. даташит / корпус на плате)
Voltaje de Entrada (VIN)
4.5V – 24V
Salida / Arquitectura
System Synchronous Step-Down PWM / Buck
Código SMD
TPS51318

Códigos SMD y Reemplazos Compatibles (Equivalentes)

Códigos de Marcado Superior SMD

Marcado directo con código de parte (TPS51318)

Equivalentes Pin a Pin y Reemplazos

Sin reemplazo universal directo; utilice TPS51318 original verificando el esquema.

Verifique siempre el encapsulado QFN/SOIC y la polaridad de ACOK / EN en el esquema antes de soldar un equivalente.

Placas Base Donantes de Portátiles con TPS51318

Marca Modelo de Portátil / Placa Plataforma Página Esquema Acción
DellDELL LATITUDE E6510 LA-5571P DA80000FP00 UMALA-5571PSchematic Page #46Ver Esquema →
DellDell Latitude E6410 LA-5471PLA-5471PSchematic Page #46Ver Esquema →
DellDell Latitude E6410 LA-5472PLA-5472PSchematic Page #46Ver Esquema →
DellDell Latitude E6410 Schematics VersionLA-5472PSchematic Page #46Ver Esquema →
DellDell Latitude E6510 SchematicsLA-5571PSchematic Page #46Ver Esquema →
DellSCHEMATIC LA-5573P DIS DELL LATITUDE E6510LA-5573PSchematic Page #4Ver Esquema →

Preguntas Frecuentes de Reparación — TPS51318

What is TPS51318 used for on a laptop motherboard?
TPS51318 by Texas Instruments is a PWM Buck 3.3V/5V Always (3.3V/5V Buck PWM) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: System Synchronous Step-Down PWM / Buck). Texas Instruments Synchronous Step-Down Buck Controller / Converter for laptop system rails
What is the SMD marking code for TPS51318?
TPS51318 is top-marked directly with its part identifier (TPS51318) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of TPS51318?
Verify main supply rail (4.5V – 24V), output impedance on System Synchronous Step-Down PWM / Buck, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use TPS51318 (donor boards)?
Confirmed laptop donor motherboards using TPS51318 include: Dell DELL LATITUDE E6510 LA-5571P DA80000FP00 UMA (LA-5571P), Dell Dell Latitude E6410 LA-5471P (LA-5471P), Dell Dell Latitude E6410 LA-5472P (LA-5472P), Dell Dell Latitude E6410 Schematics Version (LA-5472P), Dell Dell Latitude E6510 Schematics (LA-5571P). Search SchemCAD for additional board revisions.