CAD SchemCAD
USB-C PD 快充协议控制器Texas InstrumentsSMD (см. даташит / корпус на плате)

TPS65982DD — 官方 PDF 数据手册、关键引脚电压、丝印反查与笔记本料板

Texas Instruments USB Type-C Power Delivery / DisplayPort Alt-Mode Controller

芯片厂商
Texas Instruments
封装形式
SMD (см. даташит / корпус на плате)
输入电压 (VIN / VCC)
3.3V / 5V – 20V
输出规格 / 架构
USB Type-C PD / Alt-Mode Port Controller
顶部 SMD 丝印
TPS65982DD

SMD 丝印代码与兼容代换型号 (Equivalents)

芯片顶部丝印代码 (Top Marking)

表面直接印有完整或简写型号 (TPS65982DD)

原位兼容代换型号 (Pin-to-Pin)

暂无通用无差别代换型号,建议使用原型号 TPS65982DD 并核对图纸。

代换焊接前请务必核对 QFN/SOIC 封装脚数、LDO 线性输出顺序及 ACOK / EN 信号极性。

使用 TPS65982DD 的笔记本料板型号表 (Donor Motherboards)

品牌 笔记本机型 / 主板名称 主板版号 图纸页码 操作
DellDell Latitude 5400 Compal LA-G891P EDC41 r1.0 A00LA-G891PSchematic Page #2查看图纸 →
DellDell XPS 13 9380 LA-E672P SchematicLA-E672PSchematic Page #43查看图纸 →
DellLA-G871P R10 DELLL atitude 7300 7400 MERION 14ARMB A00LA-G871PSchematic Page #2查看图纸 →

芯片级维修常见问题 (FAQ) — TPS65982DD

What is TPS65982DD used for on a laptop motherboard?
TPS65982DD by Texas Instruments is a USB-C PD 快充协议控制器 integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.3V / 5V – 20V; output/spec: USB Type-C PD / Alt-Mode Port Controller). Texas Instruments USB Type-C Power Delivery / DisplayPort Alt-Mode Controller
What is the SMD marking code for TPS65982DD?
TPS65982DD is top-marked directly with its part identifier (TPS65982DD) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of TPS65982DD?
Verify main supply rail (3.3V / 5V – 20V), output impedance on USB Type-C PD / Alt-Mode Port Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use TPS65982DD (donor boards)?
Confirmed laptop donor motherboards using TPS65982DD include: Dell Dell Latitude 5400 Compal LA-G891P EDC41 r1.0 A00 (LA-G891P), Dell Dell XPS 13 9380 LA-E672P Schematic (LA-E672P), Dell LA-G871P R10 DELLL atitude 7300 7400 MERION 14ARMB A00 (LA-G871P). Search SchemCAD for additional board revisions.