CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)WinbondSOIC-8 / WSON-8

W25Q16JV — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

16Mbit (2MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing

Manufacturer
Winbond
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
16Mbit (2MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — W25Q16JV

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact W25Q16JV suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using W25Q16JV

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
HPHP EliteBook 745 G6 Inventec TENJIN 6050A3044201 MB A01 A1 Rev X016050A3044201Schematic Page #49Open Schematic →
LenovoLenovo WISTRON L14 L15 AMD 213039-1—Schematic Page #31Open Schematic →
ASRockASRock H470M-ITX-ac70-MXBCL0-A01—Open Schematic →

Technical Repair FAQ — W25Q16JV

What is W25Q16JV used for on a laptop motherboard?
W25Q16JV by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 16Mbit (2MB) 3.3V SPI NOR BIOS/EC Flash). 16Mbit (2MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (Winbond, JV/FV/DV/BV suffix = 3.3V). Preserve QE bit when flashing
What is the SMD marking code for W25Q16JV?
The top silkscreen SMD marking code for W25Q16JV is 25Q16JV (trailing characters on the package represent factory date/lot codes). Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of W25Q16JV?
Key multimeter diagnostic pin measurements for W25Q16JV: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use W25Q16JV (donor boards)?
Confirmed laptop donor motherboards using W25Q16JV include: HP HP EliteBook 745 G6 Inventec TENJIN 6050A3044201 MB A01 A1 Rev X01 (6050A3044201), Lenovo Lenovo WISTRON L14 L15 AMD 213039-1, ASRock ASRock H470M-ITX-ac (70-MXBCL0-A01). Search SchemCAD for additional board revisions.