What is W25Q256JVEIQ used for on a laptop motherboard?
W25Q256JVEIQ by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a WSON-8 (8x6mm) / SOIC-16 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: 256Mbit (32MB) 3.3V Quad-SPI UEFI BIOS Flash). 256Mbit (32MB) 3.3V Quad-SPI UEFI BIOS Flash in WSON-8 (8x6mm) or SOIC-16 (JV = 3.3V)
What is the SMD marking code for W25Q256JVEIQ?
The top silkscreen SMD marking code for W25Q256JVEIQ is 25Q256JV, 25Q256JVEQ (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: GD25B256D, MX25L25673G.
What are the key diagnostic pins / startup conditions of W25Q256JVEIQ?
Key multimeter diagnostic pin measurements for W25Q256JVEIQ: Pin 8 (VCC): 3.3V supply input (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select (oscilloscope activity here confirms EC/PCH reads BIOS); Pin 6 (CLK): Serial SPI Clock input; Pin 5/2 (DI (IO0) / DO (IO1)): Serial Data In/Out (IO0/IO1 in Quad mode); Pin 3/7 (WP# (IO2) / HOLD# (IO3)): Write Protect / Hold (IO2/IO3 in QSPI; preserve QE bit when flashing!).
Which laptop motherboards use W25Q256JVEIQ (donor boards)?
Confirmed laptop donor motherboards using W25Q256JVEIQ include: Dell DELL Latitude 5410-FDZ41 LA-J371P Rev 1.0 (LA-J371P), Lenovo LENOVO NM-C661 (NM-C661), OEM Pegatron IPCFL-CG rA00, Dell Dell Latitude 5400 Compal LA-G891P EDC41 r1.0 A00 (LA-G891P), Dell Dell Latitude 5420 Compal X12 LA-K491P Rev2 0 A01 2020 11 30 Schematic (LA-K491P). Search SchemCAD for additional board revisions.