CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)WinbondSOIC-8 / WSON-8 / USON-8⚠️ 1.8V SPI FLASH

W25Q80EWSING — Datasheet PDF, Startup Pinout (VCC (1.8V!), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (Winbond, JW/FW/DW/EW suffix = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!

Manufacturer
Winbond
Package / Case
SOIC-8 / WSON-8 / USON-8
Input Voltage (VIN / VCC)
1.65V – 1.95V (1.8V ONLY)
Output / Architecture
8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash
SMD Top Marking
W25Q80EWSING

Multimeter Diagnostic & Startup Pinout Table — W25Q80EWSING

WARNING: 1.8V Supply Only! Program ONLY with a 1.8V level-shifting adapter (direct 3.3V connection can permanently damage the IC)!

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (1.8V!)power_in⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!
1CS#buses1.8V Active-LOW Chip Select
6CLKbuses1.8V Serial SPI Clock
5/2DI/DO (IO0/IO1)buses1.8V SPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (W25Q80EWSING)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact W25Q80EWSING suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using W25Q80EWSING

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
MSIMSI MS-14B2 VER 0A MS-14B21 REV AMS-14B2Schematic Page #57Open Schematic →
MSIMSI MS-14B2 VER 10 MS-14B21MS-14B2Schematic Page #57Open Schematic →
MSIMSI MS-14B31 0BMS-14B3Schematic Page #54Open Schematic →

Technical Repair FAQ — W25Q80EWSING

What is W25Q80EWSING used for on a laptop motherboard?
W25Q80EWSING by Winbond is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 / USON-8 package (input voltage 1.65V – 1.95V (1.8V ONLY); output/spec: 8Mbit (1MB) ⚠️ 1.8V SPI NOR BIOS/EC Flash). ⚠️ 1.8V ONLY! 8Mbit (1MB) Serial SPI NOR Flash (Winbond, JW/FW/DW/EW suffix = 1.8V). MUST use a 1.8V programmer level-shifter adapter — 3.3V will destroy the IC!
What is the SMD marking code for W25Q80EWSING?
W25Q80EWSING is top-marked directly with its part identifier (W25Q80EWSING) on the SOIC-8 / WSON-8 / USON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of W25Q80EWSING?
Key multimeter diagnostic pin measurements for W25Q80EWSING: Pin 8 (VCC (1.8V!)): ⚠️ STRICTLY 1.8V (1.65V–1.95V) supply!; Pin 1 (CS#): 1.8V Active-LOW Chip Select; Pin 6 (CLK): 1.8V Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): 1.8V SPI Data IO0/IO1; Pin 4 (GND): Ground. CRITICAL: W25Q80EWSING is a 1.8V SPI NOR flash — always use a 1.8V level-shifter adapter on external programmers!
Which laptop motherboards use W25Q80EWSING (donor boards)?
Confirmed laptop donor motherboards using W25Q80EWSING include: MSI MSI MS-14B2 VER 0A MS-14B21 REV A (MS-14B2), MSI MSI MS-14B2 VER 10 MS-14B21 (MS-14B2), MSI MSI MS-14B31 0B (MS-14B3). Search SchemCAD for additional board revisions.