CAD SchemCAD
IC Sạc Pin Laptop (Battery Chargers)Texas InstrumentsSMD (см. даташит / корпус на плате)OFFICIAL PDF

BQ24610 — Datasheet PDF, Sơ đồ chân, Mã lưng SMD, IC Tương đương & Main xác

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

Hãng sản xuất
Texas Instruments
Kiểu chân (Package)
SMD (см. даташит / корпус на плате)
Điện áp vào (VIN / VCC)
4.5V – 24V
Ngõ ra / Cấu trúc
1–4S Li-Ion Battery Charge Controller
Mã lưng SMD
BQ24610

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD

In trực tiếp tên mã linh kiện (BQ24610)

IC Tương Đương Thay Thế Chân-Đổi-Chân

Chưa có mã tương đương phổ thông — nên thay đúng mã BQ24610.

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa BQ24610

Tìm kiếm vị trí BQ24610 trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 BQ24610 →

Câu Hỏi Kỹ Thuật Thường Gặp — BQ24610

What is BQ24610 used for on a laptop motherboard?
BQ24610 by Texas Instruments is a IC Sạc Pin Laptop (Battery Chargers) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24610?
BQ24610 is top-marked directly with its part identifier (BQ24610) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24610?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24610 (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ24610 across 39,000+ laptop schematics and BoardView layouts.