CAD SchemCAD
IC Sạc Pin Laptop (Battery Chargers)Texas InstrumentsWQFN-32 (4x4mm)OFFICIAL PDF

BQ25713RSNR — Datasheet PDF, Sơ đồ chân (VBUS, REGN, ILIM_HIZ, CHRG_OK), Mã lưng SMD, IC Tương đương & Main xác

1–4 Cell I2C USB-C NVDC Buck-Boost Battery Charge Controller (I2C sibling of BQ25710)

Hãng sản xuất
Texas Instruments
Kiểu chân (Package)
WQFN-32 (4x4mm)
Điện áp vào (VIN / VCC)
3.5V – 24V
Ngõ ra / Cấu trúc
1–4S USB-C NVDC Buck-Boost (I2C)
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — BQ25713RSNR

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
1VBUSpower_inAdapter / USB-C VBUS input sense (3.5V–24V)
28REGNoutputsInternal 6V LDO output for 4-switch buck-boost drivers
6ILIM_HIZcontrolInput current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state)
4CHRG_OKoutputsActive-HIGH open-drain adapter good indicator to EC
31/24HIDRV1/HIDRV2outputsHigh-side gate drives for H-bridge buck-boost power stage
12/13SDA/SCLbusesDigital host bus from EC (SMBus on 700A/710/720, I2C on 703A/713)

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa BQ25713RSNR

Hãng Dòng Máy / Tên Main Mã Main Trang Sơ Đồ Thao Tác
OEMQUANTA H97M DAH97MMBAC0DAH97MMBAC0Schematic Page #42Mở Sơ Đồ →

Câu Hỏi Kỹ Thuật Thường Gặp — BQ25713RSNR

What is BQ25713RSNR used for on a laptop motherboard?
BQ25713RSNR by Texas Instruments is a IC Sạc Pin Laptop (Battery Chargers) integrated circuit in a WQFN-32 (4x4mm) package (input voltage 3.5V – 24V; output/spec: 1–4S USB-C NVDC Buck-Boost (I2C)). 1–4 Cell I2C USB-C NVDC Buck-Boost Battery Charge Controller (I2C sibling of BQ25710)
What is the SMD marking code for BQ25713RSNR?
The top silkscreen SMD marking code for BQ25713RSNR is 25713, BQ25713, BQ5713 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: BQ25703A.
What are the key diagnostic pins / startup conditions of BQ25713RSNR?
Key multimeter diagnostic pin measurements for BQ25713RSNR: Pin 1 (VBUS): Adapter / USB-C VBUS input sense (3.5V–24V); Pin 28 (REGN): Internal 6V LDO output for 4-switch buck-boost drivers; Pin 6 (ILIM_HIZ): Input current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state); Pin 4 (CHRG_OK): Active-HIGH open-drain adapter good indicator to EC; Pin 31/24 (HIDRV1/HIDRV2): High-side gate drives for H-bridge buck-boost power stage.
Which laptop motherboards use BQ25713RSNR (donor boards)?
Confirmed laptop donor motherboards using BQ25713RSNR include: OEM QUANTA H97M DAH97MMBAC0 (DAH97MMBAC0). Search SchemCAD for additional board revisions.