CAD SchemCAD
Battery ChargersTexas InstrumentsSMD (см. даташит / корпус на плате)

BQ24741 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
4.5V – 24V
Output / Architecture
1–4S Li-Ion Battery Charge Controller
SMD Top Marking
BQ24741

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (BQ24741)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact BQ24741 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ24741

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLenovo IBM X201IX201ISchematic Page #50Open Schematic →
LenovoLenovo X201I R201I 08270-2X201ISchematic Page #50Open Schematic →
Lenovolenovo-t510-w510 48.4CU06.031 LKN-1 SWG MB 08272-308272-3Schematic Page #78Open Schematic →
LenovoKENDO-1 Dis 08271-sc THINKPAD T510 W510—Schematic Page #78Open Schematic →
LenovoLENOVO THINKPAD T410i NOZOMI-1 NZM1H-0 NZM1I-8 09A21-3—Schematic Page #78Open Schematic →
LenovoLenovo ThinkPad T410 - Nozomi1 - REV 1.31Sec—Schematic Page #77Open Schematic →

Technical Repair FAQ — BQ24741

What is BQ24741 used for on a laptop motherboard?
BQ24741 by Texas Instruments is a Battery Chargers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24741?
BQ24741 is top-marked directly with its part identifier (BQ24741) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24741?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24741 (donor boards)?
Confirmed laptop donor motherboards using BQ24741 include: Lenovo Lenovo IBM X201I (X201I), Lenovo Lenovo X201I R201I 08270-2 (X201I), Lenovo lenovo-t510-w510 48.4CU06.031 LKN-1 SWG MB 08272-3 (08272-3), Lenovo KENDO-1 Dis 08271-sc THINKPAD T510 W510, Lenovo LENOVO THINKPAD T410i NOZOMI-1 NZM1H-0 NZM1I-8 09A21-3. Search SchemCAD for additional board revisions.