CAD SchemCAD
Battery ChargersTexas InstrumentsWQFN-32 (4x4mm)OFFICIAL PDF

BQ25713RSNR — Datasheet PDF, Startup Pinout (VBUS, REGN, ILIM_HIZ, CHRG_OK), SMD Code, Equivalents & Donor Boards

1–4 Cell I2C USB-C NVDC Buck-Boost Battery Charge Controller (I2C sibling of BQ25710)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
WQFN-32 (4x4mm)
Input Voltage (VIN / VCC)
3.5V – 24V
Output / Architecture
1–4S USB-C NVDC Buck-Boost (I2C)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — BQ25713RSNR

Pin # Signal Name Role Voltage / Diagnostic Description
1VBUSpower_inAdapter / USB-C VBUS input sense (3.5V–24V)
28REGNoutputsInternal 6V LDO output for 4-switch buck-boost drivers
6ILIM_HIZcontrolInput current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state)
4CHRG_OKoutputsActive-HIGH open-drain adapter good indicator to EC
31/24HIDRV1/HIDRV2outputsHigh-side gate drives for H-bridge buck-boost power stage
12/13SDA/SCLbusesDigital host bus from EC (SMBus on 700A/710/720, I2C on 703A/713)

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ25713RSNR

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
OEMQUANTA H97M DAH97MMBAC0DAH97MMBAC0Schematic Page #42Open Schematic →

Technical Repair FAQ — BQ25713RSNR

What is BQ25713RSNR used for on a laptop motherboard?
BQ25713RSNR by Texas Instruments is a Battery Chargers integrated circuit in a WQFN-32 (4x4mm) package (input voltage 3.5V – 24V; output/spec: 1–4S USB-C NVDC Buck-Boost (I2C)). 1–4 Cell I2C USB-C NVDC Buck-Boost Battery Charge Controller (I2C sibling of BQ25710)
What is the SMD marking code for BQ25713RSNR?
The top silkscreen SMD marking code for BQ25713RSNR is 25713, BQ25713, BQ5713 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: BQ25703A.
What are the key diagnostic pins / startup conditions of BQ25713RSNR?
Key multimeter diagnostic pin measurements for BQ25713RSNR: Pin 1 (VBUS): Adapter / USB-C VBUS input sense (3.5V–24V); Pin 28 (REGN): Internal 6V LDO output for 4-switch buck-boost drivers; Pin 6 (ILIM_HIZ): Input current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state); Pin 4 (CHRG_OK): Active-HIGH open-drain adapter good indicator to EC; Pin 31/24 (HIDRV1/HIDRV2): High-side gate drives for H-bridge buck-boost power stage.
Which laptop motherboards use BQ25713RSNR (donor boards)?
Confirmed laptop donor motherboards using BQ25713RSNR include: OEM QUANTA H97M DAH97MMBAC0 (DAH97MMBAC0). Search SchemCAD for additional board revisions.