CAD SchemCAD
Battery ChargersTexas InstrumentsWQFN-32 (4x4mm)OFFICIAL PDF

BQ25720RSNR — Datasheet PDF, Startup Pinout (VBUS, REGN, ILIM_HIZ, CHRG_OK), SMD Code, Equivalents & Donor Boards

1–4 Cell SMBus Narrow-VDC Buck-Boost Charger for modern USB-C PD laptops (BQ25723 is I2C variant)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
WQFN-32 (4x4mm)
Input Voltage (VIN / VCC)
3.5V – 26V
Output / Architecture
1–4S USB-C PD 3.1 Buck-Boost (SMBus)
SMD Top Marking

Multimeter Diagnostic & Startup Pinout Table — BQ25720RSNR

Pin # Signal Name Role Voltage / Diagnostic Description
1VBUSpower_inAdapter / USB-C VBUS input sense (3.5V–24V)
28REGNoutputsInternal 6V LDO output for 4-switch buck-boost drivers
6ILIM_HIZcontrolInput current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state)
4CHRG_OKoutputsActive-HIGH open-drain adapter good indicator to EC
31/24HIDRV1/HIDRV2outputsHigh-side gate drives for H-bridge buck-boost power stage
12/13SDA/SCLbusesDigital host bus from EC (SMBus on 700A/710/720, I2C on 703A/713)

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes
Pin-to-Pin Equivalents & Cross-Reference Analogs

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ25720RSNR

Search SchemCAD interactive schematics and BoardViews to locate BQ25720RSNR across 39,000+ indexed laptop motherboards.

🔎 BQ25720RSNR →

Technical Repair FAQ — BQ25720RSNR

What is BQ25720RSNR used for on a laptop motherboard?
BQ25720RSNR by Texas Instruments is a Battery Chargers integrated circuit in a WQFN-32 (4x4mm) package (input voltage 3.5V – 26V; output/spec: 1–4S USB-C PD 3.1 Buck-Boost (SMBus)). 1–4 Cell SMBus Narrow-VDC Buck-Boost Charger for modern USB-C PD laptops (BQ25723 is I2C variant)
What is the SMD marking code for BQ25720RSNR?
The top silkscreen SMD marking code for BQ25720RSNR is 25720, BQ25720, BQ5720 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: BQ25710.
What are the key diagnostic pins / startup conditions of BQ25720RSNR?
Key multimeter diagnostic pin measurements for BQ25720RSNR: Pin 1 (VBUS): Adapter / USB-C VBUS input sense (3.5V–24V); Pin 28 (REGN): Internal 6V LDO output for 4-switch buck-boost drivers; Pin 6 (ILIM_HIZ): Input current limit & HIZ exit: must be >1.0V (<0.4V forces HIZ off state); Pin 4 (CHRG_OK): Active-HIGH open-drain adapter good indicator to EC; Pin 31/24 (HIDRV1/HIDRV2): High-side gate drives for H-bridge buck-boost power stage.
Which laptop motherboards use BQ25720RSNR (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ25720RSNR across 39,000+ laptop schematics and BoardView layouts.