CAD SchemCAD
Battery ChargersTexas InstrumentsSMD (см. даташит / корпус на плате)

BQ24742 — Datasheet PDF, Startup Pinout, SMD Code, Equivalents & Donor Boards

Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)

Manufacturer
Texas Instruments
Subsystem Category
Package / Case
SMD (см. даташит / корпус на плате)
Input Voltage (VIN / VCC)
4.5V – 24V
Output / Architecture
1–4S Li-Ion Battery Charge Controller
SMD Top Marking
BQ24742

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (BQ24742)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact BQ24742 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using BQ24742

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
LenovoLENOVO THINKPAD T420 NZM3I-6 LNVH-41-AB5700-MB—Schematic Page #1Open Schematic →
OEMWISTRON Dasher-1—Schematic Page #1Open Schematic →
LenovoTHINKPAD T520 W520 WISTRON KN3 KENDO-3 UMA H0220-SE H0220-3 SIT 101007 0930—Schematic Page #74Open Schematic →
Lenovolenovo t420s—Schematic Page #74Open Schematic →
Lenovolenovo-thinkpad-t420-nz3-uma—Schematic Page #1Open Schematic →
Lenovolenovo-thinkpad-t420-nz3-uma-fev-f-ab570-schematics—Schematic Page #1Open Schematic →

Technical Repair FAQ — BQ24742

What is BQ24742 used for on a laptop motherboard?
BQ24742 by Texas Instruments is a Battery Chargers integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 4.5V – 24V; output/spec: 1–4S Li-Ion Battery Charge Controller). Texas Instruments BQ24xxx Battery Charge Controller (check VCC, ACDET > 2.4V, 6V REGN LDO, and ACOK)
What is the SMD marking code for BQ24742?
BQ24742 is top-marked directly with its part identifier (BQ24742) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ24742?
Verify main supply rail (4.5V – 24V), output impedance on 1–4S Li-Ion Battery Charge Controller, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ24742 (donor boards)?
Confirmed laptop donor motherboards using BQ24742 include: Lenovo LENOVO THINKPAD T420 NZM3I-6 LNVH-41-AB5700-MB, OEM WISTRON Dasher-1, Lenovo THINKPAD T520 W520 WISTRON KN3 KENDO-3 UMA H0220-SE H0220-3 SIT 101007 0930, Lenovo lenovo t420s, Lenovo lenovo-thinkpad-t420-nz3-uma. Search SchemCAD for additional board revisions.