CAD SchemCAD
IC Sạc Pin Laptop (Battery Chargers)Texas InstrumentsWQFN-28 (4x4mm)OFFICIAL PDF

BQ24773RUYR — Datasheet PDF, Sơ đồ chân (VCC, ACDET, REGN, ACOK), Mã lưng SMD, IC Tương đương & Main xác

1–4 Cell NVDC Battery Charge Controller with I2C host interface (NOT interchangeable with SMBus BQ24770)

Hãng sản xuất
Texas Instruments
Kiểu chân (Package)
WQFN-28 (4x4mm)
Điện áp vào (VIN / VCC)
4.5V – 24V
Ngõ ra / Cấu trúc
1–4S NVDC I2C Charger
Mã lưng SMD

Bảng Đo Đạc Đồng Hồ & Điều Kiện Chạy (Pinout) — BQ24773RUYR

Chân # Tên Lệnh / Tín Hiệu Chức Năng Áp Chuẩn / Hướng Dẫn Đo Kiểm
28VCCpower_inIC supply input 6–24V
6ACDETcontrolAdapter voltage detect input (2.4V–3.05V)
24REGNoutputsInternal 6V gate-driver LDO
5ACOKoutputsAdapter valid open-drain output
4ACDRVoutputsInput N-MOSFET charge-pump gate drive
11/12SDA/SCLbusesI2C serial interface to EC

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD
IC Tương Đương Thay Thế Chân-Đổi-Chân

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa BQ24773RUYR

Tìm kiếm vị trí BQ24773RUYR trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 BQ24773RUYR →

Câu Hỏi Kỹ Thuật Thường Gặp — BQ24773RUYR

What is BQ24773RUYR used for on a laptop motherboard?
BQ24773RUYR by Texas Instruments is a IC Sạc Pin Laptop (Battery Chargers) integrated circuit in a WQFN-28 (4x4mm) package (input voltage 4.5V – 24V; output/spec: 1–4S NVDC I2C Charger). 1–4 Cell NVDC Battery Charge Controller with I2C host interface (NOT interchangeable with SMBus BQ24770)
What is the SMD marking code for BQ24773RUYR?
The top silkscreen SMD marking code for BQ24773RUYR is BQ773, 24773 (trailing characters on the package represent factory date/lot codes). Known pin-compatible equivalents: Нет прямой замены на BQ24770 (разные шины I2C vs SMBus).
What are the key diagnostic pins / startup conditions of BQ24773RUYR?
Key multimeter diagnostic pin measurements for BQ24773RUYR: Pin 28 (VCC): IC supply input 6–24V; Pin 6 (ACDET): Adapter voltage detect input (2.4V–3.05V); Pin 24 (REGN): Internal 6V gate-driver LDO; Pin 5 (ACOK): Adapter valid open-drain output; Pin 4 (ACDRV): Input N-MOSFET charge-pump gate drive.
Which laptop motherboards use BQ24773RUYR (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ24773RUYR across 39,000+ laptop schematics and BoardView layouts.