CAD SchemCAD
IC Sạc Pin Laptop (Battery Chargers)Texas InstrumentsSMD (см. даташит / корпус на плате)OFFICIAL PDF

BQ25798 — Datasheet PDF, Sơ đồ chân, Mã lưng SMD, IC Tương đương & Main xác

Texas Instruments BQ257xx 1–4S USB-C NVDC Buck-Boost Battery Charger (verify SMBus vs I2C variant and ILIM_HIZ > 1.0V)

Hãng sản xuất
Texas Instruments
Kiểu chân (Package)
SMD (см. даташит / корпус на плате)
Điện áp vào (VIN / VCC)
3.5V – 24V
Ngõ ra / Cấu trúc
1–4S USB-C NVDC Buck-Boost Charger
Mã lưng SMD
BQ25798

Mã Lưng SMD & IC Thay Thế Tương Đương

Mã Ký Hiệu Lưng SMD

In trực tiếp tên mã linh kiện (BQ25798)

IC Tương Đương Thay Thế Chân-Đổi-Chân

Chưa có mã tương đương phổ thông — nên thay đúng mã BQ25798.

Luôn đối chiếu sơ đồ chân QFN/SOIC và mức tích cực của lệnh ACOK / EN trên schematic trước khi đóng IC tương đương.

Main Xác Laptop (Donor Motherboards) Có Chứa BQ25798

Tìm kiếm vị trí BQ25798 trên 39.000+ schematic & BoardView tại SchemCAD.

🔎 BQ25798 →

Câu Hỏi Kỹ Thuật Thường Gặp — BQ25798

What is BQ25798 used for on a laptop motherboard?
BQ25798 by Texas Instruments is a IC Sạc Pin Laptop (Battery Chargers) integrated circuit in a SMD (см. даташит / корпус на плате) package (input voltage 3.5V – 24V; output/spec: 1–4S USB-C NVDC Buck-Boost Charger). Texas Instruments BQ257xx 1–4S USB-C NVDC Buck-Boost Battery Charger (verify SMBus vs I2C variant and ILIM_HIZ > 1.0V)
What is the SMD marking code for BQ25798?
BQ25798 is top-marked directly with its part identifier (BQ25798) on the SMD (см. даташит / корпус на плате) package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of BQ25798?
Verify main supply rail (3.5V – 24V), output impedance on 1–4S USB-C NVDC Buck-Boost Charger, and enable/power-good handshakes with the EC/KBC.
Which laptop motherboards use BQ25798 (donor boards)?
Use the SchemCAD interactive workbench or @BoardSchemBot to locate BQ25798 across 39,000+ laptop schematics and BoardView layouts.