CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)EON / EliteMTSOIC-8 / WSON-8

EN25P05 — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

SPI NOR 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing

Manufacturer
EON / EliteMT
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V Standard)
Output / Architecture
SPI NOR 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
EN25P05

Multimeter Diagnostic & Startup Pinout Table — EN25P05

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (EN25P05)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact EN25P05 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using EN25P05

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
Clevoclevo b4100m b5100m b5130m sch—Schematic Page #35Open Schematic →

Technical Repair FAQ — EN25P05

What is EN25P05 used for on a laptop motherboard?
EN25P05 by EON / EliteMT is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V Standard); output/spec: SPI NOR 3.3V SPI NOR BIOS/EC Flash). SPI NOR 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for EN25P05?
EN25P05 is top-marked directly with its part identifier (EN25P05) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of EN25P05?
Key multimeter diagnostic pin measurements for EN25P05: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use EN25P05 (donor boards)?
Confirmed laptop donor motherboards using EN25P05 include: Clevo clevo b4100m b5100m b5130m sch. Search SchemCAD for additional board revisions.