CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)EON / EliteMTSOIC-8 / WSON-8

EN25Q16 — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

16Mbit (2MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing

Manufacturer
EON / EliteMT
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
16Mbit (2MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
EN25Q16

Multimeter Diagnostic & Startup Pinout Table — EN25Q16

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (EN25Q16)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact EN25Q16 suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using EN25Q16

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellDell MIH61R Mission Hills Sawgrass 10097-110097-1Schematic Page #19Open Schematic →
DellDell OptiPlex Wistron MIH61R Mission Hills Sawgrass 10097 1 rSA10097-1Schematic Page #19Open Schematic →

Technical Repair FAQ — EN25Q16

What is EN25Q16 used for on a laptop motherboard?
EN25Q16 by EON / EliteMT is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 16Mbit (2MB) 3.3V SPI NOR BIOS/EC Flash). 16Mbit (2MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for EN25Q16?
EN25Q16 is top-marked directly with its part identifier (EN25Q16) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of EN25Q16?
Key multimeter diagnostic pin measurements for EN25Q16: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use EN25Q16 (donor boards)?
Confirmed laptop donor motherboards using EN25Q16 include: Dell Dell MIH61R Mission Hills Sawgrass 10097-1 (10097-1), Dell Dell OptiPlex Wistron MIH61R Mission Hills Sawgrass 10097 1 rSA (10097-1). Search SchemCAD for additional board revisions.