CAD SchemCAD
SPI BIOS Flash (1.8V & 3.3V)EON / EliteMTSOIC-8 / WSON-8

EN25Q80A — Datasheet PDF, Startup Pinout (VCC (3.3V), CS#, CLK, DI/DO (IO0/IO1)), SMD Code, Equivalents & Donor Boards

8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing

Manufacturer
EON / EliteMT
Package / Case
SOIC-8 / WSON-8
Input Voltage (VIN / VCC)
2.7V – 3.6V (3.3V)
Output / Architecture
8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash
SMD Top Marking
EN25Q80A

Multimeter Diagnostic & Startup Pinout Table — EN25Q80A

Pin # Signal Name Role Voltage / Diagnostic Description
8VCC (3.3V)power_in3.3V supply (2.7V–3.6V)
1CS#busesActive-LOW Chip Select
6CLKbusesSerial SPI Clock
5/2DI/DO (IO0/IO1)busesSPI Data IO0/IO1
4GNDgndGround

SMD Marking Codes & Compatible Replacements (Equivalents)

Silkscreen / Top SMD Marking Codes

Marked with full or abbreviated part number (EN25Q80A)

Pin-to-Pin Equivalents & Cross-Reference Analogs

No universal drop-in analog verified — replace with exact EN25Q80A suffix and verify schematic revision.

Always verify QFN/SOIC package pad count, LDO rail order, and ACOK/EN polarity on the board schematic before soldering an equivalent.

Laptop Donor Motherboards Using EN25Q80A

Brand Laptop / Motherboard Model Platform Code Schematic Sheet Action
DellDell Alienware 15 R3 Compal LA-D752P r0.1 X00LA-D752PSchematic Page #37Open Schematic →
HPHP PAVILION I3 14 B065BR DA0U33MB6D0DA0U33MB6D0Schematic Page #25Open Schematic →
OEMCOMPAL LA-9331P REV X00LA-9331PSchematic Page #44Open Schematic →
DellDell Alienware 15 R3 Dell Alienware 17 R4 Compal LA-D752P SchematicLA-D752PSchematic Page #37Open Schematic →
DellDell Alienware 17 LA-B753P Rev0.1 X00LA-B753PSchematic Page #37Open Schematic →
DellDell Alienware 17 R4 BAP10 LA-D751P Rev1.0 SchematicLA-D751PSchematic Page #37Open Schematic →
HPHP Pavilion 14 Quanta U33 DA0U33MB6D0 VOLKS PV schematicsDA0U33MB6D0Schematic Page #25Open Schematic →
HPQUANTA W05 DA0W05MB8E0 REV 1A HP SPLIT X2DA0W05MB8E0Schematic Page #21Open Schematic →

Technical Repair FAQ — EN25Q80A

What is EN25Q80A used for on a laptop motherboard?
EN25Q80A by EON / EliteMT is a SPI BIOS Flash (1.8V & 3.3V) integrated circuit in a SOIC-8 / WSON-8 package (input voltage 2.7V – 3.6V (3.3V); output/spec: 8Mbit (1MB) 3.3V SPI NOR BIOS/EC Flash). 8Mbit (1MB) 3.3V Serial/Quad SPI NOR BIOS/EC Flash (SPI Flash Vendor, 3.3V standard series). Preserve QE bit when flashing
What is the SMD marking code for EN25Q80A?
EN25Q80A is top-marked directly with its part identifier (EN25Q80A) on the SOIC-8 / WSON-8 package. Verify exact schematic suffix and package pinout before substituting.
What are the key diagnostic pins / startup conditions of EN25Q80A?
Key multimeter diagnostic pin measurements for EN25Q80A: Pin 8 (VCC (3.3V)): 3.3V supply (2.7V–3.6V); Pin 1 (CS#): Active-LOW Chip Select; Pin 6 (CLK): Serial SPI Clock; Pin 5/2 (DI/DO (IO0/IO1)): SPI Data IO0/IO1; Pin 4 (GND): Ground.
Which laptop motherboards use EN25Q80A (donor boards)?
Confirmed laptop donor motherboards using EN25Q80A include: Dell Dell Alienware 15 R3 Compal LA-D752P r0.1 X00 (LA-D752P), HP HP PAVILION I3 14 B065BR DA0U33MB6D0 (DA0U33MB6D0), OEM COMPAL LA-9331P REV X00 (LA-9331P), Dell Dell Alienware 15 R3 Dell Alienware 17 R4 Compal LA-D752P Schematic (LA-D752P), Dell Dell Alienware 17 LA-B753P Rev0.1 X00 (LA-B753P). Search SchemCAD for additional board revisions.